TEXAS INDUSTRIAL CHILLER BUYERS • WE BUY, NEVER SELLHAVE A CHILLER TO SELL? CALL (614) 715-3047
Owner-supplied photograph of industrial chiller equipment
Chiller buyer serving Austin

Sell a Trane Chiller in Austin, Texas

We buy Trane chillers in Austin, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.

Texas-wide service   /   20 to 2,000+ tons
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
A simpler exit for surplus equipment

WE BUY THE CHILLER.
WE HANDLE THE HEAVY LIFTING.

From first photo to final haul, we take care of the details so you can move forward.

01 / SHOW US

SEND THE DETAILS

Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.

02 / GET PAID

RECEIVE A CASH OFFER

We review the chiller and your site information, then make an offer. Payment is upfront.

03 / WE MOVE IT

LEAVE THE LOGISTICS TO US

We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.

Start with the machine and its route out

A Trane chiller in Austin may be surplus after a plant replacement, a change in building use, or a shutdown. Its next step depends on more than the nameplate: the equipment’s configuration, condition, and location all matter, as does the path from its current position to a truck. We buy used industrial and commercial chillers, including Trane equipment, subject to review. Idle and non-running units can be considered; you do not need to restart one to begin.

For an initial review, share the model and serial information if readable, approximate cooling capacity, overall photographs, and what is known about the unit’s history. Mention missing parts, whether it is still connected, and whether service notes or drawings are available. Records can help, but do not postpone an inquiry because the file is incomplete. Do not open the refrigerant circuit or vent anything to prepare the chiller.

Trace the physical pickup

Think through the route a removal crew would need to use: from the chiller’s position, through any plant-room doors or corridors, to an exterior exit, staging area, and truck. A unit on a roof, in a basement, or inside a tight mechanical room may need a different sequence from one on an accessible pad. These are planning questions, not assumed conditions at your property.

Photos of the equipment and route can make that discussion more concrete. Include doorways, turns, overhead clearances, floor or roof access, and the likely loading area where visible. If the chiller may need to pass through an occupied area, tell us what must stay open and whether the site has approved work hours or access rules. An authorized site contact should identify restrictions and confirm access arrangements.

Capacity is not shipping weight

We consider water-cooled and air-cooled chillers, including centrifugal, screw, and scroll units, generally from 20 to 2,000-plus cooling tons. We consider all refrigerants, with the actual equipment and project reviewed before any purchase is agreed. A cooling ton measures refrigeration capacity; it does not tell you the machine’s physical weight or establish how it can be lifted. Configuration and site conditions have to be assessed separately.

For a possible lift, the removal plan may depend on equipment dimensions, lifting points, route, clearances, staging room, and suitable truck or crane access. If a crane might be needed, the placement area and site permissions require review against the actual property. No one should infer a workable lift from tonnage alone.

Condition can be described, not demonstrated

Tell us whether the chiller is operating, idle, disconnected, or known to be non-running, and describe visible damage or absent components as accurately as possible. You are not required to test, repair, clean, or restart it for a sale discussion. A machine that has been out of service may still have refrigerant in its circuit or remain connected to utilities, so its status should be reported only as far as it is known.

If the present refrigerant charge is uncertain, say so. Do not try to verify it by opening the circuit. If a purchase is agreed, we arrange appropriate refrigerant recovery with qualified personnel, along with equipment disconnects, rigging, crane work when needed, loading, freight, and hauling. The removal sequence is coordinated with the authorized site contact and the property’s requirements.

Agree on scope before work begins

An offer depends on the chiller and the actual work needed to collect it. Make, configuration, condition, included components, access, and handling requirements may all affect the review. Tonnage by itself is not a price. A cash offer is discussed only after reviewing the asset and project details, and no offer is guaranteed until terms are agreed.

Before pickup, confirm which equipment is included, the agreed payment terms, site access, removal timing, and any approvals required by the property. If a purchase is agreed, payment is made upfront before pickup on those agreed terms. We take responsibility for arranging and handling the equipment work; the seller or site provides accurate information, authorized access, site rules, and necessary approvals. You do not need to hire a recovery contractor, crane company, or hauler yourself.

A useful first step

Gather whatever is readily available: identification-plate details, photographs, known operating status, and a short description of the route from the chiller to the loading point. Note who has authority to approve a sale and who can coordinate access. If some details are unknown, identify them as unknown rather than guessing. That gives us a grounded basis to review the Trane chiller and discuss whether a purchase and removal plan make sense for the actual equipment and site.

Owner-supplied photo of an industrial air-cooled chiller
Equipment we buy

IF IT’S A CHILLER,
LET’S TALK.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.

  • 20 to 2,000+ tons and all refrigerants
  • Data centers, power plants, hospitals and campuses
  • Plant closures, replacements and decommissioning
  • All rigging and freight handled by us
TELL US WHAT YOU HAVE ↗
Ready when you are

LET’S MAKE A
DEAL.

Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.

Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗

Prefer email?

saleselectricalbuyers@gmail.com

JPG or PNG. Combined photos up to 10 MB. Don’t know every detail? Send what you have. Your information is sent to our email through FormSubmit.

REQUEST A QUOTE ↗
CALL (614) 715-3047TEXT PHOTOS ↗