SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy used industrial chillers in Austin, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
We buy used industrial and commercial water-cooled and air-cooled chillers in Austin, Texas. Equipment may be a centrifugal, screw, or scroll unit, generally ranging from 20 to more than 2,000 cooling tons. We consider all refrigerants and will review idle or non-running machines; operation is not a condition for starting a conversation.
A cooling ton measures capacity, not the machine’s physical weight. For removal planning, the actual configuration, dimensions, weight, and route matter. A nameplate may provide useful identification and capacity, but it cannot establish the lift plan or confirm how the equipment will come out of a building.
Start with what is known: manufacturer and model, capacity, chiller type, refrigerant markings, approximate age if available, and whether the unit is connected, idle, or already disconnected. Share any known faults, missing parts, modifications, or service records. If something is uncertain, say so rather than estimating.
Photos can help show both the equipment and its setting. A clear nameplate image, a few wide views, and pictures of nearby connections or the apparent exit route are useful. Do not enter restricted areas or get close to energized equipment to take them. There is no need to restart, test, clean, repair, or open the refrigerant circuit for a review.
An offer depends on the asset and the project review, so it cannot be promised from capacity alone. The equipment’s identity, reported condition, included components, and the work and access involved in removal all inform the review. We consider the facts provided and clarify the proposed scope before agreeing to a purchase.
If both sides agree to proceed, payment is made upfront before pickup, on agreed terms. Confirm which chiller and any included components are part of the sale, along with the payment arrangement and pickup scope. An initial description or photo is a starting point, not a guaranteed offer or commitment to buy every unit presented.
For an agreed purchase, we arrange and handle appropriate refrigerant recovery with qualified personnel, disconnects, rigging, crane work when needed, loading, freight, and hauling. The seller does not need to hire a separate recovery contractor or hauler for the buyer’s equipment work. Do not vent refrigerant or open the system; share the available refrigerant information and leave that work to the qualified personnel involved in the removal.
The exact sequence depends on the machine and site. A chiller in an accessible area may present a different job from one in a basement, on a roof, or inside a crowded mechanical room. Narrow doors, stairs, overhead obstructions, nearby piping, floor capacity, lift access, or an active plant may affect the method and timing. Those details need review rather than assumptions based on the tonnage label.
The authorized site contact supplies accurate equipment and access information, explains site rules, identifies equipment and services outside the sale, and secures necessary approvals. If the chiller is beside operating equipment, mark the boundary clearly and explain what must remain in service. The removal work is coordinated with that contact and the facility’s approved access and work windows.
Depending on the property, pickup may require advance scheduling, escort arrangements, a designated loading area, or coordination with building operations. If a crane or other specialized handling is needed, the route, clearances, and working area must be assessed for the actual installation. Flag known restrictions early; the removal plan can then be reviewed against them.
Yes, idle and non-running equipment can be considered. A missing operating history does not by itself prevent an initial review, but describe what is known and what is not. Mention whether the unit is intact, whether components are believed to be missing, and whether refrigerant markings or records are available. Do not try to make an uncertain machine run to improve the description.
When multiple chillers are involved, identify each machine separately and clarify which are included. A group may have different models, conditions, or access routes, so one unit’s details should not be applied to the others. The proposed purchase remains subject to review of the equipment and removal scope.
Gather the information already available: nameplate photos, a general description, known condition, current location on the property, and any relevant access limits. Include the best available refrigerant details, but do not disturb the system to find out more. An authorized person should also be ready to explain site requirements and confirm permission to discuss or release the equipment.
With those details, we can review whether the chiller and proposed removal are a fit, ask focused questions, and discuss an offer. No test, repair, restart, or seller-arranged refrigerant work is needed to begin. Pickup timing and scope can be settled with the authorized site contact if a purchase is agreed.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com