TEXAS INDUSTRIAL CHILLER BUYERS • WE BUY, NEVER SELLHAVE A CHILLER TO SELL? CALL (614) 715-3047
Owner-supplied photograph of industrial chiller equipment
Chiller buyer serving Corpus Christi

Sell 250 to 499 Ton Chillers in Corpus Christi, Texas

We buy 250 to 499 ton chillers in Corpus Christi, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.

Texas-wide service   /   20 to 2,000+ tons
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
A simpler exit for surplus equipment

WE BUY THE CHILLER.
WE HANDLE THE HEAVY LIFTING.

From first photo to final haul, we take care of the details so you can move forward.

01 / SHOW US

SEND THE DETAILS

Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.

02 / GET PAID

RECEIVE A CASH OFFER

We review the chiller and your site information, then make an offer. Payment is upfront.

03 / WE MOVE IT

LEAVE THE LOGISTICS TO US

We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.

Start with what can be seen—not a startup

A 250-to-499-ton chiller can be worth reviewing even when its operating history is incomplete, it has been disconnected, or it will not run. We buy used industrial and commercial chillers, including centrifugal, screw, and scroll equipment, and consider all refrigerants. A unit’s capacity rating is useful for identifying its general class; it does not tell us its weight or establish its present condition.

You do not need to restart the machine, arrange a test, or repair it before asking us to review it. Begin with the facts you have. If a record is missing or a detail is uncertain, say so rather than trying to fill the gap by operating equipment or opening a refrigerant circuit.

Make the first look useful

Clear, current photos often answer practical questions faster than a long description. From safe positions, photograph the whole chiller, its nameplate, visible connections, and any areas that appear damaged, altered, corroded, or incomplete. If loose components belong with the unit, show them separately and identify where they are stored. Do not remove covers or enter a restricted area just to get a picture.

A nameplate image can help identify the manufacturer, model, serial number, and rated capacity when those details are legible. Add approximate dimensions if known, along with any available equipment records. If the label is unreadable or absent, a few additional views may still help us understand what is being offered. Photos support an initial review; they do not replace verification needed for a final scope or lift plan.

Separate known facts from open questions

Tell us whether the chiller is installed, disconnected, or in storage, and what you know about its history. Mention missing parts, modifications, prior leaks, visible damage, or long periods out of service if those facts are available. If the current refrigerant charge is unknown, make that clear. A label may identify the refrigerant originally specified without proving what is in the circuit now.

There is no need to diagnose an unknown fault for the initial conversation. A straightforward account of what has and has not been checked is more useful than an unsupported claim that the equipment is operational. Do not vent refrigerant or open the circuit to investigate; recovery is coordinated with qualified personnel as appropriate after the equipment and project are reviewed.

Show the route as well as the machine

For equipment in Corpus Christi, the removal plan depends on the actual property, not on the city name or tonnage alone. Photos of nearby doors, corridors, gates, piping, overhead obstructions, and the proposed loading area can help reveal the route from the chiller to a truck. Include known limits on access hours, escorts, permits, ground support, or vehicle placement when they apply. A site contact can clarify rules and identify approvals that may be required.

Outdoor exposure, tight clearances, or nearby equipment could affect handling at a particular site, but none should be assumed from location alone. Cooling tons measure capacity, not shipping weight. The actual weight, lifting points, clearances, and ground conditions must be considered before selecting rigging or a crane. We coordinate the equipment work and transport plan with the authorized site contact.

What informs a purchase review

We consider the equipment offered, available identification and condition information, what is included, and the work required to remove and haul it. The review may also need to account for disconnect boundaries, refrigerant recovery, access requirements, loading, and freight. Uncertainty does not automatically end an initial review, but an offer and agreed scope depend on the information and project as a whole.

We consider idle and non-running units, as well as operating equipment. We buy water-cooled and air-cooled chillers across a broad range of capacities, including units from 250 to 499 tons, and consider centrifugal, screw, and scroll designs. These categories describe what we may review; they do not mean every machine will be purchased. Any cash offer is specific to the asset and actual project review, not a guaranteed value based on capacity alone.

Removal and payment, if a purchase is agreed

If we agree to buy the chiller, payment is made upfront before pickup on the terms agreed for that transaction. We arrange and handle appropriate refrigerant recovery with qualified personnel, equipment disconnects, rigging, crane work when needed, loading, freight, and hauling. The seller does not need to hire a recovery contractor or hauler, provide a crane, or perform the equipment work.

The seller or site supplies accurate information, authorized access, applicable site rules, and necessary approvals. Before work is scheduled, the included equipment, work boundary, payment terms, and pickup conditions should be clear to the people authorized to approve them.

A practical next step

Send the chiller’s location, any legible nameplate details, current photos, known condition, and a brief account of access and included components. Mark uncertain details as unknown. That gives us a useful basis to review the asset and removal requirements without asking you to test or alter the equipment. We can then discuss whether a purchase and a workable pickup scope are appropriate.

Owner-supplied photo of an industrial air-cooled chiller
Equipment we buy

IF IT’S A CHILLER,
LET’S TALK.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.

  • 20 to 2,000+ tons and all refrigerants
  • Data centers, power plants, hospitals and campuses
  • Plant closures, replacements and decommissioning
  • All rigging and freight handled by us
TELL US WHAT YOU HAVE ↗
Ready when you are

LET’S MAKE A
DEAL.

Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.

Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗

Prefer email?

saleselectricalbuyers@gmail.com

JPG or PNG. Combined photos up to 10 MB. Don’t know every detail? Send what you have. Your information is sent to our email through FormSubmit.

REQUEST A QUOTE ↗
CALL (614) 715-3047TEXT PHOTOS ↗