TEXAS INDUSTRIAL CHILLER BUYERS • WE BUY, NEVER SELLHAVE A CHILLER TO SELL? CALL (614) 715-3047
Owner-supplied photograph of industrial chiller equipment
Chiller buyer serving Austin

Sell Centrifugal Chillers in Austin, Texas

We buy centrifugal chillers in Austin, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.

Texas-wide service   /   20 to 2,000+ tons
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
A simpler exit for surplus equipment

WE BUY THE CHILLER.
WE HANDLE THE HEAVY LIFTING.

From first photo to final haul, we take care of the details so you can move forward.

01 / SHOW US

SEND THE DETAILS

Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.

02 / GET PAID

RECEIVE A CASH OFFER

We review the chiller and your site information, then make an offer. Payment is upfront.

03 / WE MOVE IT

LEAVE THE LOGISTICS TO US

We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.

Start with what you know

You do not need to test, restart, repair, clean, or disconnect a centrifugal chiller before asking about a sale. An idle or non-running unit can still be reviewed. Do not vent refrigerant or open the chiller’s refrigerant circuit; if a purchase is agreed, we coordinate appropriate recovery with qualified personnel.

For an initial review, share the equipment’s identifying information, its location within the property, and a few current photographs if they are safe to take. A readable nameplate can help establish the make, model, and rated capacity. If the plate is damaged or inaccessible, send whatever label or description is available rather than guessing.

Describe the machine, not just the tonnage

We buy centrifugal chillers in Austin, Texas, and consider units across a broad range of capacities and refrigerants. Cooling tons describe a chiller’s capacity; they do not tell us its weight or how it can be moved. Physical dimensions, configuration, condition, and the route out of the building matter when reviewing removal.

Note what is known about the machine’s operating history, current condition, and refrigerant charge. Records of past service, changes, or decommissioning may be useful, but missing records do not prevent an initial conversation. There is no need to estimate performance or state that the unit works if you cannot verify that.

Make the equipment boundary clear

Central plants may contain several chillers, pumps, controls, piping, or other equipment close together. Identify the specific centrifugal chiller being offered and explain what is included in the sale. If a control panel, motor, or other component is separate, note that too. Clear boundaries help keep the review focused on the agreed asset rather than neighboring plant equipment.

If the unit is part of a plant upgrade, share the expected changeover or removal window and identify who is coordinating the project. An operating facility may need work scheduled around continued cooling, deliveries, or contractor activity. Those constraints can be discussed with the authorized site contact before a pickup plan is settled.

Access affects the removal plan

A chiller’s location and the available route can shape the work substantially. Tell us whether it is indoors or outdoors and whether you know of restricted doors, stairs, low clearances, overhead services, limited staging space, or controlled entry. If it sits on a roof or below grade, include that information. Photos of the route and loading area can help, provided they can be taken safely.

Site conditions vary, so a nameplate alone cannot establish how a machine will leave the property. The actual plan may depend on clearances, surrounding equipment, floor or roof access, lift requirements, and the site’s approved work procedures. Share known restrictions and work-hour limits; the responsible parties can review the route and timing before agreeing on the scope.

One coordinated removal scope

If a purchase is agreed, we coordinate and handle the equipment-side work: appropriate refrigerant recovery, disconnects, rigging, crane work when needed, loading, freight, and hauling. The work is planned around the actual chiller and property. You do not need to arrange a separate recovery contractor, crane, or hauler for work that is part of our agreed removal scope.

The seller or site representative supplies accurate information, authorized access, applicable site rules, and necessary approvals. Identify the person authorized to approve the sale and the contact who can coordinate entry and work boundaries. If permits, escorts, safety orientations, or scheduling windows apply, mention them early so they can be considered in planning.

Offer and payment terms

A cash offer depends on review of the specific equipment and the complete project, including condition, included components, access, handling requirements, and freight. An offer is not guaranteed, and capacity alone does not determine value. We review the information and removal scope before agreeing to terms; no particular outcome should be assumed until that review is complete.

When a purchase is agreed, payment is made upfront before pickup, on the terms confirmed with the seller. Keep the equipment identification, included assets, access arrangements, and agreed removal window clear between the authorized parties. This helps align payment and pickup with the same scope.

A useful next step

Gather the chiller’s nameplate details if available, current photos, a brief account of its known condition, and a description of where it sits and how the site is accessed. Add any records or project timing that may affect removal. Send what you have for review; you do not need to start the machine or resolve unknowns before beginning the discussion.

If information is incomplete, say so plainly. A site contact can help confirm access, approvals, and which equipment is included as the review proceeds. The next step is to assess the actual machine and job, then discuss whether a purchase and removal plan can be agreed.

Owner-supplied photo of an industrial air-cooled chiller
Equipment we buy

IF IT’S A CHILLER,
LET’S TALK.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.

  • 20 to 2,000+ tons and all refrigerants
  • Data centers, power plants, hospitals and campuses
  • Plant closures, replacements and decommissioning
  • All rigging and freight handled by us
TELL US WHAT YOU HAVE ↗
Ready when you are

LET’S MAKE A
DEAL.

Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.

Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗

Prefer email?

saleselectricalbuyers@gmail.com

JPG or PNG. Combined photos up to 10 MB. Don’t know every detail? Send what you have. Your information is sent to our email through FormSubmit.

REQUEST A QUOTE ↗
CALL (614) 715-3047TEXT PHOTOS ↗