SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy chillers marked R-11 in San Antonio, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
An R-11 marking can identify an older chiller, but it does not by itself confirm the refrigerant currently in the system, its charge, or the machine’s condition. We buy used industrial and commercial chillers, including units marked R-11, and consider equipment that is idle or no longer running. A purchase is subject to review of the specific asset and removal scope.
The practical question is not only whether the chiller may suit a buyer; it is how the equipment can be moved from where it sits to a truck. In San Antonio, the actual building, yard, and access route will determine what handling plan is workable. There is no need to assume a particular obstacle: the first step is to describe the route as it exists.
Share the equipment make and model, capacity if known, readable nameplate details, and photographs of the whole unit and any R-11 marking. Include available service, refrigerant, or conversion records, but do not treat a label or old record as confirmation of the current charge. If the equipment’s history is incomplete, say so rather than trying to fill in gaps.
Also explain whether the chiller is installed or stored, whether it is operating, and what parts or accessories are included. A cooling ton measures capacity, not the machine’s weight. If you know the weight or have lifting information, it may help with planning, but a tonnage figure is not a substitute for handling details.
Describe the full path: the chiller’s position, the route to an exit or loading area, and where a truck could stand. Photos from several points can show doorways, turns, steps, overhead clearance, nearby equipment, and the condition of the floor or ground. Measurements are useful when available; do not enter a restricted or unsafe area to take them.
Depending on the site, the unit may need to pass through a narrow opening, move across a change in level, or be lifted out rather than rolled along a direct route. Ground support, overhead services, turning room, and the distance to a suitable truck position may affect the plan. These are items to review, not presumed problems at your facility.
After reviewing the actual equipment and surroundings, we coordinate the appropriate disconnects, rigging, crane work when needed, loading, freight, and hauling. We handle the equipment-side work. The authorized site contact supplies accurate information, access, applicable site rules, and necessary approvals, and identifies any operating boundaries that must be respected.
You do not need to run, restart, repair, or test the chiller to begin a review. Do not vent refrigerant or open the circuit to prepare for an offer. We arrange and handle appropriate refrigerant recovery with qualified personnel, based on the equipment and agreed work scope. The actual refrigerant and system condition remain subject to confirmation through suitable review.
Electrical and piping disconnects must be coordinated with the facility’s authorized representatives. If adjoining equipment or active services need to remain in operation, tell us what must stay untouched and who can approve access or isolation. The work plan can then account for those limits before pickup is scheduled.
We consider water-cooled and air-cooled chillers, including centrifugal, screw, and scroll units, generally from 20 to 2,000+ cooling tons, and consider all refrigerants. An R-11 marking is useful information, not a promise of purchase. A cash offer depends on the equipment, available details, and actual project review; it is not guaranteed.
If we agree to purchase the chiller, payment is made upfront before pickup on the agreed terms. The seller is not expected to arrange a crane, recovery provider, carrier, or hauling company. The agreed scope and site coordination are addressed before the equipment is moved.
Put together the identification you can access safely, current photographs, known condition and history, included components, and a brief description of the route to a truck. Note any schedule expectations, access restrictions, approvals, or services that must remain in operation. Send that information for review; you do not need to clean, disconnect, restart, or prepare the chiller before starting the conversation.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com