SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy Smardt chillers in Texas for projects involving surplus equipment. We offer upfront payment, handle removal, and do not require seller testing.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
A surplus Smardt chiller does not need a complete service file to begin a review. Tell us what you know about its location, operating status, and reason for being available. If details are uncertain, say so: a unit may be idle, disconnected, stored, or still tied into facility systems, and those differences matter more than a guess about its condition.
We buy used industrial and commercial chillers in Texas, including Smardt equipment, and consider centrifugal, screw, and scroll units across a broad capacity range. We consider all refrigerants and can review idle or non-running machines. That does not mean every unit will receive an offer; the equipment and the work needed to acquire it are reviewed before terms are agreed.
Clear, ordinary photos can help establish what is being offered without asking you to operate the machine. Include the full chiller from more than one angle, the control panel, visible connections, and the identification plate if it can be photographed safely. A plate image may help identify the manufacturer, model, serial number, and capacity, but do not climb, remove guards, open panels, or enter a restricted area to get it.
Photograph the route out as well as the equipment. Images of doors, corridors, stairs, loading areas, outdoor approaches, and overhead obstructions can help frame access questions. If the machine is on a roof, in a basement, or surrounded by active plant equipment, show the relevant route and explain what is known; do not assume that a photo alone confirms structural capacity or a lift plan.
Use a short note or annotated photo to distinguish the Smardt chiller from items that are staying. Identify any accessories you intend to include, such as controls or other attached components, and mention nearby pumps, piping, or equipment that are not for sale. Clear boundaries help keep the purchase review and removal scope aligned.
You do not need to start, test, repair, clean, or restart the chiller for us to consider it. Share the known history instead: when it last operated, whether it was shut down normally, any reported faults, and whether components were removed or changed. “Unknown” is a useful answer when records are missing. A non-running unit can still be reviewed, although its condition and completeness may affect the decision.
Do not vent refrigerant or open the refrigerant circuit to check what remains. The current charge and refrigerant condition are not established by appearance, and the machine may retain refrigerant even if it has been idle for a long time. We arrange appropriate refrigerant recovery with qualified personnel as part of an agreed removal plan.
The review considers the actual asset, not just its nameplate capacity. Relevant details may include model and configuration, known condition, refrigerant, included components, and whether the chiller is complete. Cooling tons measure capacity; they do not tell us how much the equipment weighs or what it takes to remove. If weight is documented, share the source. Otherwise, avoid estimating it from tonnage.
The overall job matters too. A chiller on an open pad may present different handling needs from one inside a mechanical room with a narrow exit, limited overhead clearance, or a route shared with facility operations. Ground support, access hours, lifting constraints, and required approvals are assessed for the actual site. These details can affect an offer, but they cannot be settled by assuming a standard pickup arrangement.
If a purchase is agreed, the offer and included equipment are confirmed on agreed terms, with payment made upfront before pickup. A cash offer is not automatic or guaranteed; it depends on the chiller and the project review. You do not need to hire a separate recovery contractor, crane, rigger, or hauler for work that we arrange as the equipment buyer.
We coordinate appropriate recovery, disconnects, rigging, crane work when needed, loading, freight, and hauling with the authorized site contact. The removal method follows the reviewed conditions rather than a presumed equipment layout. The seller or site contact provides accurate information, authorized access, applicable site rules, and necessary approvals. Facility services that must remain in place should be identified before work is scheduled.
Gather the plate photo if available, several views of the machine and its access route, a brief description of known condition, and a list of what is included or excluded. Note any uncertainty rather than trying to resolve it by testing the chiller. With that starting information, we can review the Smardt surplus equipment, identify questions about the asset or site, and determine whether a purchase offer is appropriate.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com