SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy chillers marked R-22 in Dallas, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
You do not need to start an R-22 chiller, repair it, disconnect it, or open its refrigerant circuit to ask whether it may be purchased. Idle and non-running equipment can be considered. A label marked R-22 is useful identification, but it does not by itself establish what refrigerant is currently in the system or the machine’s condition.
For an initial review, the most useful starting details are the unit’s identification, where it is located, what is known about its condition, and who can authorize a sale and arrange site access. We buy used water-cooled and air-cooled chillers, including centrifugal, screw, and scroll models, and consider all refrigerants. Purchase is subject to review of the particular equipment and removal project.
If the chiller cannot operate, or the facility would rather not restart it, say so. You are not expected to prove that it runs before providing information. Share the model and serial number if readable, the nameplate capacity, manufacturer, and any known history. Photos of the equipment and its identification plate can help, but do not delay an inquiry if a plate is missing or difficult to reach.
Note whether the unit is still installed, disconnected, or in storage, and whether major components appear to be missing or damaged. Records such as service notes, conversion information, or refrigerant labels are helpful when available. If the present refrigerant is uncertain, make that clear rather than trying to determine it by opening the system.
An R-22 marking may reflect the original charge or an earlier configuration. A machine could have been converted, serviced with a different refrigerant, or left with an unknown charge; only the equipment’s actual history and condition can clarify that. This is why the marking helps identify the asset but is not enough to settle the removal or handling plan.
Do not vent refrigerant or attempt recovery to prepare the chiller for review. If a purchase is agreed, we coordinate appropriate recovery with qualified personnel, along with the equipment work needed for removal. Any handling requirements depend on what is found and the circumstances of the project.
We generally consider industrial and commercial chillers from about 20 cooling tons to 2,000 tons and above. The cooling-ton rating indicates capacity; it does not tell us the machine’s physical weight, dimensions, or how it can be moved. Those details, plus the actual route out, matter when planning pickup.
For a machine in a mechanical room, on a roof, or behind other equipment, useful photos show the surrounding space and possible exit route. If available, include door and corridor clearances, overhead obstructions, loading access, and any known limits on work hours or vehicle access. These details help identify questions for the site review; they are not a request for you to plan the rigging.
When a purchase is agreed, we handle the equipment work and coordinate disconnects, rigging, crane work when needed, loading, freight, and hauling. The removal method depends on the chiller’s configuration and the facility’s actual conditions. An authorized site contact should explain access rules, required approvals, active systems that must be protected, and any scheduling constraints.
The seller does not need to hire a separate recovery provider, crane, or hauler for our removal. We coordinate those requirements as appropriate. Site personnel remain responsible for accurate information, authorized access, applicable site rules, and approvals needed to perform the work.
A cash offer is based on review of the equipment and the proposed project; it is not guaranteed by the R-22 marking, capacity, or a photograph. Condition, included components, access, and removal requirements may all matter. If both sides agree to a purchase, payment is made upfront before pickup under the terms agreed for that transaction.
Gather whatever information is already available: identification-plate and refrigerant-label photos, a few views of the chiller in place, known condition or service history, and a short description of access. Include the unit’s location in Dallas, whether it is installed or stored, and the name or role of the person authorized to discuss its sale. Missing records or a non-running machine do not prevent an initial review.
With those details, the equipment and likely removal questions can be reviewed before anyone assumes a particular scope. Do not restart or dismantle the chiller for this purpose. If the facts are incomplete, identify what is known and what remains uncertain; the next step is to review the asset and determine whether a purchase and pickup plan can be agreed.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com