TEXAS INDUSTRIAL CHILLER BUYERS • WE BUY, NEVER SELLHAVE A CHILLER TO SELL? CALL (614) 715-3047
Owner-supplied photograph of industrial chiller equipment
Chiller buyer serving Houston

Sell Chillers Marked R-12 in Houston, Texas

We buy chillers marked R-12 in Houston, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.

Texas-wide service   /   20 to 2,000+ tons
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
A simpler exit for surplus equipment

WE BUY THE CHILLER.
WE HANDLE THE HEAVY LIFTING.

From first photo to final haul, we take care of the details so you can move forward.

01 / SHOW US

SEND THE DETAILS

Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.

02 / GET PAID

RECEIVE A CASH OFFER

We review the chiller and your site information, then make an offer. Payment is upfront.

03 / WE MOVE IT

LEAVE THE LOGISTICS TO US

We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.

You do not need to start, test, repair, or restart a chiller marked R-12 before asking us to review it. Leave the refrigerant circuit closed; do not vent it or open the system. We buy used industrial and commercial chillers, including idle and non-running equipment, and can consider a unit even when its service history is incomplete.

For an initial review, share whatever identification is available, the chiller’s condition as you understand it, what components are included, and where the equipment is located in Houston. Photos of the nameplate, the unit, and its surroundings are useful if readily available. Unknowns are fine to identify as unknowns rather than guess at.

Start with what the label actually says

“R-12” may appear on a refrigerant label, service record, or equipment documentation. Send a clear photo or transcription of the marking, and mention any known conversion or refrigerant replacement. If labels are damaged, records conflict, or the current charge is unknown, explain that. A historical marking alone does not establish what refrigerant is in the machine today.

Manufacturer, model, serial number, and cooling capacity can help identify the asset, but provide only information you can confirm. We consider water-cooled and air-cooled equipment, including centrifugal, screw, and scroll chillers, generally from 20 to 2,000-plus cooling tons. A ton measures cooling capacity, not the machine’s weight or the lifting requirement.

Condition and completeness matter more than a startup

Tell us whether the chiller is operating, idle, disconnected, or non-running, and describe known damage or missing parts. Note whether controls, pumps, electrical panels, or other components are included when you know. You are not expected to diagnose a fault or prove performance. If the history is partial, a straightforward account of what is known—and what is not—gives us a more useful basis for review.

We consider equipment across refrigerant types, but each asset is reviewed on its own information and removal requirements. An offer is not automatic: the equipment, condition, available details, and project scope all matter. We can discuss a cash offer after reviewing the actual asset and project; no amount is guaranteed before that review.

Give the site contact a role early

Identify who owns the chiller or has authority to approve its sale, and who can authorize access and explain site rules. These may be different people. If the unit is in a controlled area, a plant room, on a roof, or in a shared industrial property, describe the arrangement only as it applies to your site.

Access details can shape the removal plan: for example, a narrow route, overhead obstruction, operating equipment nearby, restricted work hours, or a required escort may affect how the work is coordinated. Photos of the route and loading area can help clarify conditions. The site representative supplies accurate information, authorized access, applicable rules, and necessary approvals; we coordinate the equipment work with that contact.

Removal is planned around the actual installation

If a purchase is agreed, we arrange and handle appropriate refrigerant recovery with qualified personnel, along with disconnects, rigging, crane work when needed, loading, freight, and hauling. The work is coordinated for the equipment and site conditions rather than assumed from the refrigerant marking or chiller type alone. You do not need to hire a recovery contractor, crane, or hauler as a prerequisite to asking us about the equipment.

For planning, tell us whether the unit remains connected and whether its position or route presents known access constraints. The weight, lifting points, clearances, and handling approach need to be established for the actual machine and installation. Cooling-ton capacity should not be used as a substitute for verified weight. The site contact can also flag permits, safety procedures, or scheduling limits that may apply.

Agree on payment and scope before pickup

A proposed purchase depends on review of the equipment and the practical project scope; it is not a blanket promise to buy every unit. If we agree to purchase, payment is made upfront before pickup, on the terms agreed with the authorized seller. Confirm which chiller and included components are covered, the agreed payment terms, and the planned access and pickup arrangements before removal begins.

What to send for a first review

A concise description is enough to begin. Include the refrigerant marking and equipment identification if available, known operating or storage status, any missing components, and the general access conditions. Attach existing photos or records if convenient; do not dismantle panels or expose the refrigerant circuit to gather information. If details are unavailable, say so and let us know who can answer site questions.

With that information, we can assess whether the chiller and its removal scope merit further discussion. The seller’s next step is simply to share the available facts and confirm who is authorized to discuss the sale and coordinate access. Testing, repair, restart, and refrigerant handling are not required from you to request a review.

Owner-supplied photo of an industrial air-cooled chiller
Equipment we buy

IF IT’S A CHILLER,
LET’S TALK.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.

  • 20 to 2,000+ tons and all refrigerants
  • Data centers, power plants, hospitals and campuses
  • Plant closures, replacements and decommissioning
  • All rigging and freight handled by us
TELL US WHAT YOU HAVE ↗
Ready when you are

LET’S MAKE A
DEAL.

Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.

Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗

Prefer email?

saleselectricalbuyers@gmail.com

JPG or PNG. Combined photos up to 10 MB. Don’t know every detail? Send what you have. Your information is sent to our email through FormSubmit.

REQUEST A QUOTE ↗
CALL (614) 715-3047TEXT PHOTOS ↗