SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy Multistack chillers in Texas for projects involving refrigerant recovery. We offer upfront payment, handle removal, and do not require seller testing.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
A Multistack chiller can be worth reviewing even when its operating history is incomplete. A nameplate may identify a model or capacity while service files are missing, the unit has been idle for years, or nobody can confirm its last run. Those gaps do not require you to restart the machine or arrange a test. We consider idle and non-running equipment, and assess a potential purchase from the information available and the actual project scope.
Share uncertainties plainly. If the refrigerant marking is unreadable, the current charge is unknown, or a fault was reported secondhand, say so rather than guessing. Do not vent refrigerant or open a circuit to check what is inside. We consider all refrigerants, but the equipment and recovery plan still need review before any offer or removal terms are settled.
Begin with clear photographs: the Multistack nameplate, an overall view, and the visible modules, controls, or accessories you believe belong with the chiller. Note whether the proposed sale is for the complete assembly or only identified equipment. If nearby pumps, piping, electrical gear, or another chiller must stay, distinguish those items in the photos or a short written note. A clear boundary helps keep the purchase discussion aligned with the equipment authorized for removal.
Capacity can help identify a unit, but cooling tons measure capacity—not the machine’s weight. Do not estimate lifting requirements from tonnage. If available, provide model and serial information, stated capacity, refrigerant marking, approximate dimensions, and any records already on hand. Missing details are useful to flag; you do not need to create new records or expose yourself to equipment hazards to fill gaps.
Refrigerant handling is part of planning a safe, workable pickup, not a task you need to complete before asking about a sale. If a purchase is agreed, we arrange and handle appropriate recovery with qualified personnel, taking the reported refrigerant and actual equipment condition into account. The recovery approach and sequence are coordinated with authorized site personnel and applicable site requirements.
A chiller that will not run may still contain refrigerant or remain connected to building services. Avoid treating “out of service” as proof that a circuit is empty or that utilities are isolated. Tell us what is known about the machine’s status and which surrounding systems must remain available. We arrange the equipment-side recovery and disconnect work; the site contact provides accurate information, authorized access, site rules, and necessary approvals.
The route from the chiller to a loading point can shape the removal sequence as much as the machine itself. Depending on the site, relevant constraints may include room or roof access, door and corridor dimensions, overhead obstructions, floor conditions, operating hours, loading-area rules, or nearby equipment that cannot be disturbed. A few wide and close-up photos of the room and proposed route can help make those conditions concrete.
Tell us who can authorize the work and what access procedures apply. If escorts, advance scheduling, permits, or protection of active building systems may be required, include that information early. We coordinate disconnects, rigging, crane work when needed, loading, freight, and hauling with the authorized site contact. The seller does not need to hire a separate recovery crew, crane, or hauler for our work.
We buy used industrial and commercial water-cooled and air-cooled chillers, including centrifugal, screw, and scroll equipment. Our general range is about 20 to more than 2,000 cooling tons, and Multistack units are considered within that broader equipment scope. Brand, capacity, and a photograph alone do not guarantee a purchase. Any cash offer depends on the asset and an actual project review, including the equipment offered and the practical removal requirements.
If we agree to purchase the chiller, payment is made upfront before pickup on the terms agreed for that transaction. Confirm the equipment included, access responsibilities, and removal plan before scheduling work. An offer is not guaranteed, and a review does not mean every machine will be accepted.
Send the information you already have about the Multistack chiller and its Texas location: identification photos, known condition, refrigerant details if available, included equipment, and a brief description or photos of the access route. Mention plainly where records are missing or details are uncertain. That gives us a basis to review the asset and discuss what else, if anything, is needed to assess a possible purchase. There is no need to test, run, repair, restart, empty, or disconnect the unit first.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com