SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy modular chillers in Corpus Christi, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
Modular chillers can be offered even when their records are incomplete or their operating history is unclear. A nameplate may be faded, a controller may be unavailable, or the last service notes may not tell the whole story. Share what you can verify and mark what you do not know; missing details are a reason to review the equipment, not to guess at its condition.
We buy used modular chillers in Corpus Christi and consider idle and non-running units as well as equipment that has been operating. You do not need to test, restart, repair, or open the refrigerant circuit to begin. A purchase and any cash offer depend on review of the specific equipment and removal job, so neither a particular outcome nor an amount is assured in advance.
Useful first information includes manufacturer and model, serial or nameplate details if legible, approximate capacity if known, and the number of sections being offered. Cooling tons describe capacity, not the chiller’s weight. If capacity, refrigerant, or module configuration is uncertain, say so rather than estimating. We consider all refrigerants, but do not ask sellers to vent, open, or handle refrigerant circuits.
Photographs can help clarify what the written description cannot. Take a wide view of the installation and closer images of accessible labels, visible damage, connections, and the modules included in the sale. Do not remove panels or reach into equipment to get a better picture. If records are limited, note the last known operating status and when that information was obtained, if known.
Modular equipment may sit beside pumps, piping, electrical gear, controls, or another chiller that must remain in service. Identify which sections and accessories are yours to sell, which are included, and which must stay. If modules share headers, controls, or connections, flag that arrangement so the proposed purchase scope and the eventual removal plan refer to the same items.
Tell us who has authority to approve the sale and who can confirm access and site requirements. For a plant changeover, include the expected handoff window and any operating restrictions you already know. The schedule is coordinated against the actual project; no particular pickup date should be assumed before the equipment and site have been reviewed.
A modular layout can make removal different from moving a single packaged machine. Sections may need separate handling, or a connected assembly may have to be divided at an approved boundary. The right approach depends on the actual configuration, clearances, lifting points, and site conditions. If the equipment is indoors, share the known route through doors, corridors, stairs, service openings, or other access points. For outdoor equipment, note the working area around it and any known restrictions on truck or crane positioning.
In Corpus Christi, describe the site as it is rather than relying on a general assumption about local conditions. If the chiller is exposed outdoors, mention visible corrosion or other concerns if known; if it is protected inside a building, note that instead. Restricted gates, overhead obstructions, limited work hours, or nearby operating equipment may affect planning when present. The site’s authorized contact can clarify procedures and conditions that photographs do not show.
If a purchase is agreed, we coordinate appropriate refrigerant recovery with qualified personnel, along with disconnects, rigging, crane work when needed, loading, freight, and hauling. The specific crew and handling method depend on the reviewed equipment and job. The seller does not need to hire a recovery contractor, crane, or hauler, and should not disconnect the chiller or release refrigerant independently.
Our team is responsible for the equipment work covered by the agreed removal plan. The seller or site representative supplies accurate information, authorized access, applicable site rules, and necessary approvals. Before work is scheduled, make known any access controls, permit steps, safety orientation, shutdown coordination, or other requirements that apply to the location.
We consider water-cooled and air-cooled modular chillers, including centrifugal, screw, and scroll equipment, generally from 20 to 2,000+ cooling tons. That range describes equipment we consider, not a promise to buy every unit. The offer, if one is made, reflects the asset and the actual project review, including the agreed scope and removal requirements.
If both sides agree to a purchase, payment is made upfront before pickup on the agreed terms. Confirm the equipment included, payment terms, authorized seller, and collection arrangements before the crew is dispatched. To start, assemble any available labels or records, a few safe photographs, a candid condition summary, and the name of the person who can confirm site access. Unknowns are useful to identify; they are not a reason to test or open the machine.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com