SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy chillers in mechanical rooms in Fort Worth, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
A planned replacement, plant reconfiguration, or change in building use can leave a chiller with no role in the next phase. If your Fort Worth mechanical room has equipment you intend to remove, start by identifying the unit and the date it needs to be cleared. That timing matters: the removal may need to fit between installation work, building operations, or another contractor’s activities. We buy used industrial and commercial chillers, including idle and non-running equipment, subject to review.
You do not need to restart or test the machine to begin. Share what you know about its condition and history, and be clear about what is being offered. A purchase and cash offer depend on review of the equipment and the actual removal project; neither is guaranteed. If we agree to buy, payment is made upfront before pickup, on the terms agreed with the seller.
Mechanical rooms often contain connected systems that are not part of the sale. Mark which chiller is being offered and identify any included controls or accessories. Also say what must remain: nearby pumps, piping, electrical gear, another chiller, or shared plant components may look like part of one assembly without belonging in the transaction.
A clear boundary helps align the offer with the work. If the machine is one of several units in a tight room, label it in photographs or describe its position relative to a fixed feature. Mention known connections and anything that could be affected by moving it. Do not disconnect equipment or open a refrigerant circuit to clarify what is inside.
Send an equipment-nameplate photo if it is safely visible, plus a wider view showing the room and the chiller in context. Manufacturer, model, capacity, and refrigerant details can help identify the asset, but missing or unreadable information does not require you to operate the unit. Include the approximate dimensions if known and describe whether it is running, idle, incomplete, or non-running.
Then trace the likely route out: room doors, corridors, turns, stairs or level changes, overhead clearance, and the exit to a loading area. Photos from more than one point can reveal obstructions that a close-up misses. If measurements or verified shipping weight are available, provide them; do not use the cooling-ton rating as an estimate of weight. A cooling ton measures capacity, not how heavy the machine is.
Before agreeing on a collection window, note when the room and route are available and who can authorize access. In a building that remains occupied or operational, the site may set work hours, escort requirements, protection measures, or restrictions on service areas. A loading dock, driveway, or staging location may also need to be reserved, depending on the actual layout.
Tell us about active services, restricted areas, overhead obstructions, and any planned work by the replacement contractor. If the route passes through a shared space, identify who controls it and what approvals are needed. We coordinate the removal with the authorized site contact; the seller or site provides accurate information, authorized access, applicable rules, and necessary approvals.
If a purchase is agreed, we arrange and handle appropriate refrigerant recovery with qualified personnel, along with disconnects, rigging, crane work when needed, loading, freight, and hauling. The actual method depends on the chiller and the conditions at the site. The seller does not need to hire a recovery provider or crane, repair the unit, or prepare it for a restart.
Do not vent refrigerant, open the circuit, or try to perform recovery yourself. Let us know whether the charge is known and whether the equipment is connected, but treat uncertain details as unknown until reviewed. Site rules and approvals still apply, and the authorized contact helps coordinate access and any operational limits.
A useful first submission is simple: equipment identification, current photos, known operating condition, what is included, the proposed changeover or removal window, and a short description of the route to loading. Add measurements or site restrictions when available. If you are unsure about an item, say so rather than guessing.
With that information, we can review whether the chiller and removal project fit a potential purchase, clarify what additional details are needed, and discuss the scope and timing. No pickup date should be assumed until the equipment, access, approvals, and work window have been reviewed and agreed. You can begin with the information already available; there is no need to test, clean, repair, or disconnect the chiller first.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com