SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy chillers in mechanical rooms in Dallas, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
A chiller in a mechanical room is both an asset to review and a large object that eventually has to reach a truck. For a Dallas-area facility, the removal plan begins with the equipment’s present position and the path from that position to an approved loading point. A machine may fit through a doorway yet still require a different sequence because of turns, low clearances, stairs, floor limits, or nearby equipment. Those are questions to check at the actual site, not reasons to assume the unit cannot be moved.
We buy used industrial and commercial water-cooled and air-cooled chillers, including centrifugal, screw, and scroll models. We consider units generally from 20 to more than 2,000 cooling tons, across refrigerants, and will review idle or non-running equipment. Tonnage describes cooling capacity; it does not tell us the machine’s weight or the lifting method it may need.
A useful starting set is a clear photograph of the equipment, its identification plate if safely visible, and a wider view showing how it sits in the room. If available, include approximate dimensions, known condition, and any records already on hand. Photos of the doorway, turns, corridor, stairs or elevator, and likely exit can help make the proposed route easier to assess. Do not enter a restricted area or move a panel to gather details.
Tell us what is known and mark the rest as unknown. A missing operating history, incomplete label, disconnected machine, or uncertain refrigerant charge does not call for a seller-run test. Do not restart the chiller, open its refrigerant circuit, or vent refrigerant to prepare it for review. An offer depends on the equipment information and project scope we can actually confirm.
Think through each transition: the machine’s position, any space needed to disconnect it, the opening out of the mechanical room, the building route, and the point where a truck could be loaded. Depending on the facility, the plan may need to account for a lift, floor loading, overhead clearance, an occupied work area, or a restricted service entrance. These conditions vary, so photographs and dimensions are more useful than a general description such as “easy access.”
Some rooms have a direct route; others may require a carefully coordinated turn, temporary access arrangements, or lifting equipment. A crane may be appropriate in some circumstances, but that cannot be determined from tonnage alone. We review the route and handling needs for the actual project and coordinate appropriate rigging, crane work when needed, loading, freight, and hauling if a purchase is agreed.
A chiller may sit among pumps, piping, electrical gear, controls, or other equipment that is staying in service. Identify what is included in the proposed sale and what must remain. If the unit serves a shared plant or is adjacent to operating equipment, the authorized facility contact can explain isolation limits, site procedures, access windows, and approvals needed before work begins. The removal sequence must follow the actual system and property requirements.
The buyer handles the equipment work, including appropriate refrigerant recovery arranged with qualified personnel and the necessary disconnects, rigging, and transport. The seller or site is responsible for accurate information, authorized access, applicable site rules, and required approvals. You do not need to hire a recovery contractor, crane, or hauler for us, and you should not open or drain a refrigerant circuit.
Mechanical-room equipment can be idle, incomplete, or no longer connected to its original services. Share known issues such as missing components, visible damage, storage history, or a recent change in location. If there are loose parts or records associated with the chiller, say where they are and whether they are included. There is no need to repair, clean, test, or restart the machine to request a review.
We consider the asset together with its condition, included items, removal scope, and pickup logistics. A cash offer is subject to that review and is not guaranteed. If a purchase is agreed, payment is made upfront before pickup on the terms agreed with the seller.
To begin, send the equipment description, any available plate and room photographs, what is known about its condition, and a few details about the route to the loading point. Include access limits or approval requirements if you already know them. We can review what you provide, identify remaining questions, and discuss whether the chiller and its removal scope are suitable for an offer. The final plan is based on the actual equipment and site—not an assumed configuration or a generic removal sequence.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com