SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy Carrier chillers in Texas for projects involving plant upgrade. We offer upfront payment, handle removal, and do not require seller testing.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
A Carrier nameplate helps identify a chiller, but it does not tell the whole story of an older plant asset. Capacity, model, compressor arrangement, refrigerant, controls, modifications, and condition all matter to a review. We buy used industrial and commercial water-cooled and air-cooled chillers, including Carrier centrifugal, screw, and scroll units. We consider equipment from about 20 to 2,000+ cooling tons, across refrigerants, including idle or non-running machines. A ton measures cooling capacity, not shipping weight.
Send whatever information is already available: clear nameplate photos, overall views, compressor or control labels, and a short account of what is known about operating history or changes. If records are incomplete, say so. There is no need to start, test, clean, repair, or restart the chiller to request a review. Do not open the refrigerant circuit or vent refrigerant.
During a plant upgrade, the outgoing chiller may be only one part of a larger changeover. Please distinguish the equipment proposed for sale from pumps, piping, controls, electrical gear, or neighboring machines that will remain. Note any accessories you intend to include. Photographs with the proposed boundary identified can help both sides discuss the same scope before removal is planned.
Timing matters too. Share the anticipated date when the unit can be released, whether it sits beside equipment that must remain active, and who is authorized to coordinate access. If a replacement project is underway, the chiller's availability and the facility's operating needs can shape the pickup sequence. The sale review does not assume that an entire plant or work area is available to the crew.
The move is physical, not just a matter of arranging freight. A removal plan follows the machine from its installed position through each opening and work area to a loading point. Depending on the actual site, the route may involve a doorway, corridor, stair, service elevator, exterior pad, or crane lift. None should be assumed usable until its dimensions, capacity, access, and site restrictions are understood.
Useful details include approximate equipment dimensions and weight if documented, visible lifting or rigging clearances, overhead obstructions, turning space, floor limits if known, and the distance to a truck-accessible location. Photographs of the chiller and the full route are more useful than a close-up alone. If the equipment is below grade or behind active plant areas, show the relevant openings and transitions. Do not guess at structural capacity; flag uncertainty for review.
Loading conditions can matter as much as the route. Tell us whether truck access, staging, loading hours, or a shared service lane may be restricted. For an occupied facility, identify routes and work areas that must stay clear and any applicable noise, safety, escort, or approval rules. The authorized site contact can clarify boundaries and access requirements before a schedule is confirmed.
If a purchase is agreed, we coordinate and handle appropriate refrigerant recovery with qualified personnel, along with disconnects, rigging, crane work when needed, loading, freight, and hauling. The work is planned around the specific chiller and the agreed removal boundary. The seller is not expected to hire a recovery contractor, book a crane, arrange a hauler, or deliver the equipment as a condition of an initial review.
Buyer-side coordination does not replace site authorization. The seller or property representative supplies accurate information, authorized access, applicable site rules, and necessary approvals. The facility contact also helps confirm when the equipment can be isolated and which adjacent systems must remain untouched. No work should begin until the scope and site arrangements are understood.
A cash offer depends on the actual asset and project review, including the equipment information, condition as reported, included components, and practical removal requirements. Providing access photographs and known details helps establish what is being considered, but does not guarantee an offer or purchase. A non-running status by itself does not prevent a review.
If both sides agree to a purchase, payment is made upfront before pickup, on the agreed terms. The equipment included, access plan, timing, and removal responsibilities should be clear before the transaction proceeds. No particular price or outcome can be promised before the review.
Gather the Carrier identification plate, a few broad photographs, any available dimensions or weight records, and a simple description of the route to the loading point. Add the planned upgrade timing, what stays in the plant, known condition, refrigerant information if documented, and the name or role of the authorized site contact. With those details, the equipment and the path out can be reviewed together without asking you to run or prepare the chiller.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com