SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy Carrier chillers in Texas for projects involving rigging and lifting. We offer upfront payment, handle removal, and do not require seller testing.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
A Carrier nameplate is a useful starting point, but the brand alone does not establish a chiller’s capacity, configuration, refrigerant, condition, or removal needs. We buy used industrial and commercial water-cooled and air-cooled chillers, including Carrier equipment, and consider centrifugal, screw, and scroll units. The first review is about the particular machine being offered and whether its purchase and removal can be planned on agreed terms.
Send clear photos of the main identification plate and, if safely accessible, labels on compressors or controls. Include the model and serial information you can read, approximate cooling capacity if known, and whether the unit is installed, disconnected, stored, idle, or non-running. A cooling ton measures capacity; it does not tell us the chiller’s weight or determine what lifting equipment a site needs.
Tell us what is included in the proposed sale: for example, the chiller itself and any components that are intended to go with it. Mention missing panels, removed parts, visible damage, prior repairs, or a known change in configuration. If service records or operating history are unavailable, say so. You do not need to reconstruct a history or restart the machine to begin a review.
We consider equipment across a broad range of sizes, generally from 20 to more than 2,000 cooling tons, and consider all refrigerants. An unknown refrigerant charge, incomplete records, or equipment that cannot run does not by itself rule out an initial review. Do not vent refrigerant or open the circuit to identify what is inside. We arrange appropriate recovery with qualified personnel as part of an agreed removal scope.
Next, describe where the chiller sits and how it could reach a loading area. Photos of the unit in place, doors or corridors along the route, the exterior access, and the proposed truck position can help. Available drawings, dimensions, shipping information, or a verified equipment weight are useful if already on hand; do not treat rated capacity as a substitute for weight.
Flag possible restrictions rather than guessing at a solution. Depending on the facility, the route may involve tight turns, low overhead clearance, limited floor or ground support, an elevated installation, restricted work hours, or other operations that must continue nearby. Identify known lift points and obstructions if documented, and note who can confirm site rules. The actual handling method—including whether a crane is needed—depends on the machine and conditions reviewed.
Tell us which site contact can approve access and coordinate the work area, and whether escorts, permits, scheduling windows, or advance notice may apply. If the chiller is part of a replacement project, share the likely availability date and any adjacent equipment, piping, or controls that must remain. This helps define what is being sold and when collection could be coordinated without assuming that other facility systems are included.
The seller or site contact supplies accurate information, authorized access, applicable site rules, and necessary approvals. We coordinate the equipment work with that authorized contact. Utility isolation and the boundary between the chiller and systems staying at the facility should be clarified before work begins; the facility’s representatives determine and authorize site-specific access and isolation requirements.
After reviewing the equipment details and available site information, we can discuss whether to make an offer and what removal scope would apply. A cash offer depends on the asset and actual project review; it is not guaranteed. Condition, included components, recovery needs, loading access, and transport can all matter. If important details are uncertain, identify them so they can be addressed before terms are agreed.
If both sides agree to proceed, confirm the equipment included, payment terms, authorized contacts, access requirements, and a workable collection window. Payment is made upfront before pickup, on the agreed terms. You are not required to test, operate, repair, or restart the chiller to qualify for consideration, and you do not need to arrange a separate rigging crew or hauler.
For an agreed purchase, we arrange and handle appropriate refrigerant recovery with qualified personnel, disconnects, rigging, crane work when needed, loading, freight, and hauling. The sequence is coordinated around the reviewed site conditions and the authorized contact’s requirements. A crane is not assumed for every removal, nor is a particular lift plan chosen before the equipment and route are understood.
Before collection, the parties should have a shared understanding of the work area, access route, equipment being removed, and any site approvals or scheduling limits. If conditions differ from the information provided, the plan may need review before work proceeds. To start, gather the nameplate and current equipment photos, note what is known about condition and location, and describe the route and site contact. That information is enough to begin a practical review without preparing the chiller for a test run.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com