SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy York chillers in Texas for projects involving cash offers. We offer upfront payment, handle removal, and do not require seller testing.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
A York nameplate can identify a useful starting point, but it does not tell the whole story of a chiller offered for sale. Models and configurations vary, and a unit may have been modified, partly dismantled, or left idle. We review York water-cooled and air-cooled chillers across a broad range of capacities, including centrifugal, screw, and scroll equipment. We consider all refrigerants and may review non-running units; purchase depends on the actual equipment and project review.
It is fine to separate confirmed details from estimates. Share what the label says, what facility records show, and what you simply do not know. An uncertain refrigerant, incomplete history, or unavailable operating data is useful context—not a reason to guess or reopen the system.
A small, deliberate photo set is often more useful than a large folder of close-ups. If safely accessible, photograph the full chiller from several sides, its nameplate, and any visible control panel or attached components. Include signs of damage, removed parts, or corrosion if present. Keep people clear of equipment, electrical hazards, and restricted areas; do not climb or move barriers to get a better angle.
Then show the setting: the chiller in relation to doors, corridors, stairs, roof edges, loading areas, or an exterior route. A distant view can reveal constraints that a machine-only picture misses. If the installation is indoors or elevated, a safe view of the route toward a loading point may help frame the removal review. Photos support planning, but they do not establish equipment weight, lifting points, or a safe crane setup.
Identification is only one part of an assessment. Capacity, type, known condition, completeness, age when documented, included components, and the likely work to remove the unit can all matter. The nameplate’s cooling-ton rating describes capacity; it is not the chiller’s shipping weight. If weight or dimensions are available from reliable records, include them, but do not treat an estimate as verified.
Removal conditions also affect whether a purchase makes sense. The review may need to account for the chiller’s location, access limits, recovery and disconnect scope, rigging, possible crane work, loading, and freight. A cash offer is based on the asset and actual project review, not a standard rate for every York machine. An offer is not guaranteed, and no purchase is assumed until terms and included equipment are agreed.
You do not need to start, test, repair, or restart the chiller for review. A unit that has been idle or will not run can still be considered. Describe its known status plainly: for example, whether it is connected, tagged out, reported faulty, or simply untested. Do not convert a secondhand report into a claim that you personally verified.
Likewise, do not vent refrigerant or open the circuit to find out what is inside. Share refrigerant labels, service records, or other available documentation and flag any uncertainty. If a purchase is agreed, we arrange and handle appropriate recovery with qualified personnel, along with the required disconnects and removal work.
Tell us where the chiller sits and describe the path from its current position to the likely loading area. Mention known limits such as narrow passages, overhead obstructions, restricted dock hours, roof access rules, or surfaces that cannot carry heavy equipment. These may or may not apply at a particular site; the authorized contact can clarify actual conditions. Do not guess at crane reach or ground capacity.
We coordinate appropriate rigging, crane work when needed, loading, freight, and hauling. The buyer is responsible for the agreed equipment work. The seller or site contact supplies accurate information, authorized access, applicable site rules, and necessary approvals. If other equipment, piping, or nearby plant must remain undisturbed, identify those boundaries before the work plan is finalized.
Before scheduling, confirm which York unit is included, who has authority to sell it, the agreed amount and payment terms, and the planned removal scope. If a purchase is agreed, payment is made upfront before pickup on the terms agreed by both sides. Access windows, site restrictions, and handoff arrangements should also be settled with the authorized contact so the crew can work within the facility’s requirements.
To begin a review, gather the available nameplate details, a few safe overview and route photos, the unit’s known operating status, and any records about refrigerant, modifications, or missing components. Add the site location and the best description you have of access. If a detail is unknown, say so rather than delaying to test or dismantle the machine. That information gives us a practical basis to review the York chiller and determine whether an offer and coordinated removal can be discussed.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com