TEXAS INDUSTRIAL CHILLER BUYERS • WE BUY, NEVER SELLHAVE A CHILLER TO SELL? CALL (614) 715-3047
Owner-supplied photograph of industrial chiller equipment
Chiller buyer serving Midland

Sell Air-Cooled Chillers in Midland, Texas

We buy air-cooled chillers in Midland, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.

Texas-wide service   /   20 to 2,000+ tons
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
A simpler exit for surplus equipment

WE BUY THE CHILLER.
WE HANDLE THE HEAVY LIFTING.

From first photo to final haul, we take care of the details so you can move forward.

01 / SHOW US

SEND THE DETAILS

Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.

02 / GET PAID

RECEIVE A CASH OFFER

We review the chiller and your site information, then make an offer. Payment is upfront.

03 / WE MOVE IT

LEAVE THE LOGISTICS TO US

We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.

You do not need to test, restart, repair, or disconnect an air-cooled chiller before asking us to review it. If the unit is idle or will not run, say so; that does not prevent an initial review. Do not vent refrigerant or open the circuit. We buy used air-cooled chillers in Midland, Texas, subject to review of the equipment and the removal project.

A few practical details help us understand what is being offered: the nameplate or model information if available, approximate cooling capacity, known condition, refrigerant markings, and where the unit sits. Photos can be useful, but take them only from safe, authorized areas. Cooling tons describe capacity, not the chiller’s weight, so lifting requirements need separate assessment.

Start with the machine and its position

Air-cooled units may be installed on a ground-level pad, beside a building, on a roof, or in another constrained area. The actual configuration matters more than a general description of the property. Let us know whether the chiller is outdoors or enclosed, and whether nearby equipment, fencing, piping, or building features could affect access.

If you know the manufacturer, model, serial number, capacity, or refrigerant designation, include those details. A photograph of the identification plate can help, as can an overall view showing the unit and its surroundings. If a label is missing, hard to read, or potentially out of date, simply note that; do not guess about the current refrigerant charge.

Report condition without preparing the unit

Describe what you know about the chiller’s operating history, recent service, damage, missing components, or modifications. These details support a more informed review, but you are not expected to diagnose the equipment or prove that it runs. If its condition is uncertain, say what is known and what is not.

We consider used equipment across a broad capacity range, including smaller and larger industrial or commercial units, and consider all refrigerants. Whether a particular chiller is a fit depends on its actual condition, configuration, identification, and removal requirements. An inquiry is not a promise to purchase.

Access is part of the project

For a unit at grade, describe the route from the chiller to a place where loading might be possible. For a rooftop installation, share what is known about building access, height, clearances, and potential staging space. These are starting points for planning, not proof that a particular lift or truck arrangement will work.

Also mention known gate procedures, work-hour limits, security requirements, overhead obstructions, or shared routes. If the chiller is near operating equipment, identify what must remain in service and any boundaries the removal crew must observe. An authorized site contact can clarify access rules, approvals, and the areas available for work.

Removal and refrigerant handling

If a purchase is agreed, we coordinate and handle the removal scope with the authorized site contact. As appropriate to the equipment and site, that scope can include qualified refrigerant recovery, utility disconnects, rigging, crane work when needed, loading, freight, and hauling. The actual sequence and equipment needed are determined after the project is reviewed.

Recovery and lifting requirements cannot be confirmed from the cooling-ton rating alone. The machine’s physical characteristics, known contents, condition, surroundings, and permitted access all matter. The seller or site should provide accurate information and the necessary approvals; you do not need to hire a recovery contractor, arrange a crane, or find a hauler for our review.

Offer and payment terms

A cash offer depends on the asset and the actual project review, including the removal work involved. It is not guaranteed, and we do not assume every unit can be purchased. If we agree on a purchase, payment is made upfront before pickup, on the terms agreed with the seller.

Before work is scheduled, confirm who is authorized to sell the chiller, exactly which equipment is included, and who will provide site access. Clear agreement on scope and timing helps avoid confusion about what is being removed and what must remain in place.

What to send for an initial review

Gather whatever is readily available; do not delay because a detail is missing. A concise description can cover:

  • Make, model, serial number, or a nameplate photo, if available.
  • Approximate capacity, refrigerant markings, and known operating condition.
  • Current location, access route, and any known lifting or scheduling constraints.
  • Photos of the unit and surroundings taken from safe, authorized vantage points.

Share that information with the buyer and identify the person authorized to discuss the equipment and site requirements. From there, the chiller and proposed removal scope can be reviewed, and you can decide whether the offered terms work for you. No testing, repair, restart, or seller-arranged refrigerant work is needed to begin.

Owner-supplied photo of an industrial air-cooled chiller
Equipment we buy

IF IT’S A CHILLER,
LET’S TALK.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.

  • 20 to 2,000+ tons and all refrigerants
  • Data centers, power plants, hospitals and campuses
  • Plant closures, replacements and decommissioning
  • All rigging and freight handled by us
TELL US WHAT YOU HAVE ↗
Ready when you are

LET’S MAKE A
DEAL.

Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.

Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗

Prefer email?

saleselectricalbuyers@gmail.com

JPG or PNG. Combined photos up to 10 MB. Don’t know every detail? Send what you have. Your information is sent to our email through FormSubmit.

REQUEST A QUOTE ↗
CALL (614) 715-3047TEXT PHOTOS ↗