SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy 1,000 to 1,999 ton chillers in Midland, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
A 1,000 to 1,999 ton chiller is a substantial asset, but its capacity number does not tell a buyer its weight, configuration, condition, or removal difficulty. We consider large water-cooled and air-cooled chillers in this range, including centrifugal and screw machines, as well as other types. Idle and non-running units can be reviewed. The first useful step is sharing what you already know, not getting the machine running.
For equipment in Midland, Texas, begin with a few clear photographs and the information on the identification plate, if it is accessible without entering a restricted area or disturbing the unit. These provide different kinds of evidence: the plate helps identify the machine, while wider views show how it sits within the facility. Neither replaces the other.
A close, readable image of the equipment label may show the manufacturer, model, serial number, capacity, and refrigerant designation. Include the full label rather than a cropped detail when possible. If the plate is missing, damaged, or hard to read, send an overall image and explain what you could not confirm; do not guess at specifications.
Wider photographs should show the chiller in place, nearby equipment, and the approaches to the work area. A view from each safe side can reveal piping, panels, overhead clearance, barriers, or limited room to position handling equipment. If the machine is indoors or elevated, include the surrounding room or structure only where site rules permit. Do not climb, open panels, or approach operating equipment to improve a photograph.
Removal planning follows the machine from its present position to a practical loading point. Share what is known about doors, corridors, gates, stairs, roof access, turning space, ground conditions, and the route a truck or crane may need to use. A simple sketch or measured opening can clarify a route that photographs make difficult to judge. Note overhead obstructions and any areas that must remain accessible.
Photos and route details answer separate questions. Pictures help show visible clearances and the relationship between equipment and surroundings; measurements and site information help test whether a proposed path is workable. If the chiller is on a roof, in a plant room, or behind other equipment, describe that setting plainly and identify any known access limits. A crane, rigging method, and staging area are assessed against actual conditions, not assumed from the tonnage.
Tell us whether the chiller is operating, idle, disconnected, or known to be non-running, and mention missing components, damage, modifications, or uncertain history. You do not need to test, restart, repair, or clean it for review. If the equipment’s status is unclear, say so; an honest gap in the information is more useful than an unsupported conclusion.
We consider all refrigerants, but the current charge and refrigerant type must be established as part of the actual project review. A label can help, though it may not reflect later service or changes. Do not vent refrigerant or open the circuit. If the label is unavailable or inconsistent with facility records, flag that for the authorized site contact.
Capacity alone cannot establish an offer. The machine’s identity, configuration, condition, available components, and the access and handling work all inform review. A cash offer depends on the asset and the project details and is not guaranteed. We buy the equipment when a purchase is agreed; we do not ask the seller to arrange a test or hire a recovery crew, crane, riggers, or hauler.
If a purchase is agreed, payment is made upfront before pickup on terms confirmed by both sides. We coordinate appropriate refrigerant recovery with qualified personnel, necessary disconnects, rigging, crane work when needed, loading, freight, and hauling. The seller or site supplies accurate information, authorized access, applicable site rules, and necessary approvals. The authorized contact should identify what may be isolated and which neighboring systems or services must remain protected.
Before sharing material, confirm that you are authorized to discuss or sell the equipment and that photographs can be taken under site policy. Include the Midland location, available label details, overall and access-route photographs, known condition, and any timing or access restrictions. Identify unanswered questions rather than filling them in by assumption.
With those details, we can review whether the chiller and removal scope fit a potential purchase and explain what additional information may be needed. Do not move the unit or begin refrigerant, utility, or structural work for an inquiry. The equipment remains in place until a purchase and a coordinated pickup plan are agreed.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com