TEXAS INDUSTRIAL CHILLER BUYERS • WE BUY, NEVER SELLHAVE A CHILLER TO SELL? CALL (614) 715-3047
Owner-supplied photograph of industrial chiller equipment
Chiller buyer serving San Antonio

Sell a Aaon Chiller in San Antonio, Texas

We buy Aaon chillers in San Antonio, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.

Texas-wide service   /   20 to 2,000+ tons
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
A simpler exit for surplus equipment

WE BUY THE CHILLER.
WE HANDLE THE HEAVY LIFTING.

From first photo to final haul, we take care of the details so you can move forward.

01 / SHOW US

SEND THE DETAILS

Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.

02 / GET PAID

RECEIVE A CASH OFFER

We review the chiller and your site information, then make an offer. Payment is upfront.

03 / WE MOVE IT

LEAVE THE LOGISTICS TO US

We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.

Draw the line around the chiller first

Selling an Aaon chiller in San Antonio starts with a clear answer to one practical question: which equipment is part of the sale? A chiller can sit among pumps, controls, piping, electrical gear, and other machines that the facility needs to keep. The proposed purchase should identify the chiller and any accessories included, while leaving surrounding systems outside the boundary unless they are specifically agreed.

That distinction matters during both review and removal. A wide photograph can show how the unit fits into the plant; closer pictures can identify its nameplate and connections. If several machines look similar, label the one being offered and note what stays in service. Do not disconnect anything to make the boundary clearer. A description and photographs are enough to begin.

Give the equipment an honest introduction

Useful starting details include the model and serial number, available capacity information, approximate location on the property, and what is known about operating condition. Share whether the machine is idle, in service, incomplete, or not running, if known. If a detail is uncertain, say so rather than estimating. We consider used commercial and industrial chillers across a broad range of capacities and refrigerants, including equipment that cannot currently operate.

No seller-run test, restart, repair, or circuit opening is required for an initial review. A cooling ton measures capacity; it does not tell us the machine’s weight or how it can be moved. The equipment configuration, refrigerant charge, history, and condition still need to be established from available information and project review. Never vent refrigerant or open a refrigerant circuit to prepare for a sale.

Make the handoff boundary workable

Once the included assets are clear, the site handoff can be considered separately. Tell us who is authorized to approve access and coordinate the work, and whether the property has sign-in procedures, restricted work hours, safety requirements, or required approvals. The seller or site contact supplies accurate information, authorized access, and necessary approvals. The equipment removal work is arranged and handled by the buyer under the agreed scope.

Connections may be shared with equipment that remains, or utilities may pass close to the chiller. Those details can affect the order of work. Identify known shared services and the facility representative who can confirm what may be isolated. There is no need to make those changes yourself. Disconnects are coordinated with the authorized site contact so that the agreed equipment is separated without treating adjacent plant systems as part of the sale.

Plan the route, not just the machine

A sound move plan follows the chiller from its installed position to the loading point. Depending on the actual installation, the route may involve a mechanical-room doorway, an elevator or level change, a roof opening, a narrow service area, or an outdoor access path. Share any known dimensions, obstructions, overhead restrictions, and limits on truck or crane placement. These are details to review, not reasons to assume a particular removal method.

For a chiller in a crowded plant room, a few views can be especially helpful: the entire machine, its immediate surroundings, the closest exit, and the route between them. For an outdoor or elevated installation, include the mounting area and visible access constraints. Do not climb, enter restricted areas, or move barriers just to take photographs. Existing plans or measurements can help, but missing dimensions do not require the seller to perform a survey.

Put refrigerant and lifting in the same plan

Recovery, disconnects, rigging, crane work when needed, loading, freight, and hauling are coordinated as parts of the removal. Qualified personnel handle appropriate refrigerant recovery. Which equipment and access arrangements are needed depends on the machine and site; those choices should follow review of the actual route, clearances, and lifting conditions, rather than a guess based on capacity alone.

Tell us about known restrictions such as limited staging space, occupied work areas, active equipment nearby, or a required pickup window. The site contact can explain property rules and coordinate access. The buyer handles the equipment work within the agreed scope; the facility does not need to hire its own recovery crew, crane operator, or hauler for that work.

Review the purchase before scheduling pickup

A cash offer depends on the asset and actual project review. Equipment identity, included components, known condition, and removal requirements all help define the proposal; an offer is not guaranteed. If a purchase is agreed, the terms, included equipment, and handoff are confirmed in advance, with payment made upfront before pickup on the agreed terms. Scheduling follows coordination with the authorized site contact.

To start, gather the information already available: nameplate photographs, overall views, known condition, included items, access notes, and the name or role of the person authorized to discuss the equipment. Send what you have and identify what remains unknown. That gives the buyer a practical basis to review the Aaon chiller, clarify the sale boundary, and discuss whether a purchase and removal plan can be agreed—without requiring you to test, repair, restart, or prepare the machine for transport.

Owner-supplied photo of an industrial air-cooled chiller
Equipment we buy

IF IT’S A CHILLER,
LET’S TALK.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.

  • 20 to 2,000+ tons and all refrigerants
  • Data centers, power plants, hospitals and campuses
  • Plant closures, replacements and decommissioning
  • All rigging and freight handled by us
TELL US WHAT YOU HAVE ↗
Ready when you are

LET’S MAKE A
DEAL.

Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.

Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗

Prefer email?

saleselectricalbuyers@gmail.com

JPG or PNG. Combined photos up to 10 MB. Don’t know every detail? Send what you have. Your information is sent to our email through FormSubmit.

REQUEST A QUOTE ↗
CALL (614) 715-3047TEXT PHOTOS ↗