SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy chillers marked R-11 in El Paso, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
A chiller marked R-11 can be reviewed for purchase whether it is operating, idle, or no longer part of the facility’s cooling plan. We buy used industrial and commercial chillers, including centrifugal, screw, and scroll machines, and consider all refrigerants. A purchase is not automatic: the offer depends on the equipment and a review of the proposed project.
For an initial review, send whatever reliable details are available: photographs of the nameplate and refrigerant markings, manufacturer and model, stated capacity, approximate age, known operating condition, and any records of repair or conversion. Missing paperwork does not prevent a first discussion. Be clear about what is known and what is uncertain, especially if the unit has been altered or its refrigerant history is incomplete.
A label is useful, but it may not establish what refrigerant is currently in the system. The unit could have been serviced or converted during its life. Share accessible labels and records without opening the circuit, transferring refrigerant, or trying to verify the charge yourself. Do not vent refrigerant or prepare the machine by draining it.
We arrange and handle appropriate refrigerant recovery with qualified personnel as part of the agreed work. The method and sequence depend on the equipment and what is found during the project review. You do not need to hire a recovery contractor, test the chiller, or restart it just to request consideration.
Photographs help connect the machine to the route out. Include a wide view of its room or outdoor position, nearby equipment, doors, corridors, loading area, and the route toward an approved truck position. If known, note doorway widths, ceiling clearances, stairs, floor transitions, overhead obstructions, and whether the chiller must pass through occupied or active areas.
Access conditions are specific to each site. Security check-in, gate hours, restricted work periods, limited staging space, or nearby operating services may affect how pickup is coordinated. Point out the constraints you know about; do not assume a crane or a particular rigging method will fit. We assess the removal needs with the authorized site contact and arrange the required disconnects, rigging, crane work when needed, loading, freight, and hauling.
Chiller capacity is often shown in tons, but a cooling ton measures capacity, not the machine’s physical weight. Do not use the capacity rating to estimate what a lift can handle. If a shipping weight, dimensions, rigging drawing, or equipment layout is available, share it. If not, say so. The actual configuration and lifting plan must be reviewed for the particular unit and site.
Also identify what is included in the proposed sale: controls, pumps, starters, accessories, or separate components, if applicable. Tell us which nearby equipment must remain. Clear boundaries help prevent confusion between the chiller being considered and other facility assets.
The seller or property representative does not have to perform the equipment work. The authorized site contact does need to provide accurate information, approved access, applicable site rules, and required permissions. Before work begins, confirm who can authorize removal, what equipment is included, where crews may work, and any facility procedures they must follow.
We coordinate the work covered by the agreed purchase and removal scope. The actual sequence may depend on recovery, utility disconnects, access, rigging, and freight arrangements. If the chiller is in a mechanical room, for example, doors, columns, overhead services, adjacent machinery, and the route to the loading point may shape the plan. Describe those conditions rather than preparing the unit yourself.
A cash offer is based on the asset and actual project review, not simply its R-11 marking or stated tonnage. Condition, included components, available identification, and removal requirements can all matter. An offer is not guaranteed. If both sides agree to a purchase, payment is made upfront before pickup, on the agreed terms.
To get started, gather the clearest nameplate and refrigerant-label photographs available, a few views of the chiller and its access route, and a short note about condition, location within the property, and included items. Identify the person authorized to discuss the equipment and site access. That information supports a useful first review without requiring a test run, repair, refrigerant handling, or a commitment to proceed.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com