TEXAS INDUSTRIAL CHILLER BUYERS • WE BUY, NEVER SELLHAVE A CHILLER TO SELL? CALL (614) 715-3047
Owner-supplied photograph of industrial chiller equipment
Chiller buyer serving Corpus Christi

Sell a Aaon Chiller in Corpus Christi, Texas

We buy Aaon chillers in Corpus Christi, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.

Texas-wide service   /   20 to 2,000+ tons
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
A simpler exit for surplus equipment

WE BUY THE CHILLER.
WE HANDLE THE HEAVY LIFTING.

From first photo to final haul, we take care of the details so you can move forward.

01 / SHOW US

SEND THE DETAILS

Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.

02 / GET PAID

RECEIVE A CASH OFFER

We review the chiller and your site information, then make an offer. Payment is upfront.

03 / WE MOVE IT

LEAVE THE LOGISTICS TO US

We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.

Start with what is known, not a restart

An Aaon chiller can be worth reviewing even when it has been idle, will not start, or comes with only a partial file. Records may be missing because the equipment changed hands, maintenance was handled by several contractors, or the unit has been out of service for years. Describe what you know plainly and separate confirmed facts from estimates. We consider non-running equipment; you do not need to test, repair, or restart it to begin a review.

We buy used commercial and industrial water-cooled and air-cooled chillers, including Aaon equipment, across a broad range of capacities and refrigerants. A unit may be considered whether it is operating, stored, or awaiting removal. That does not mean every machine will receive an offer: the decision depends on the identified asset, its condition, included components, location, and removal requirements.

Build a useful first description

Begin with the model and serial number from the equipment plate, if it can be read safely, along with any available capacity information. Photos of the full assembly, controls, plate, and visible piping can help distinguish the chiller from nearby equipment. If the plate is faded, inaccessible, or missing, say so rather than guessing. A rough description is still useful for an initial review.

Include the machine’s present status: in service, disconnected, stored, or not running, for example. Note known faults, removed parts, repairs, refrigerant information, and the last date it was operated only when those details are available. A complete service history is helpful, but it is not a condition of starting a conversation. Do not open the refrigerant circuit or vent refrigerant to identify the charge.

Define exactly what could change hands

Make clear which equipment is included and which items must remain. Chillers can sit beside pumps, piping, electrical gear, or other cooling equipment that is not part of the proposed sale. A marked-up photo or a short inventory can prevent confusion. Mention loose components or accessories if they are included, and flag any uncertainty about ownership or authority to sell before removal planning begins.

Capacity is commonly expressed in cooling tons, but tonnage measures cooling capacity, not the machine’s weight. Weight and lifting points must be established from reliable equipment information or site review; they should not be inferred from the tonnage. If original drawings, manuals, installation records, or prior rigging notes exist, they may help, but there is no need to reconstruct a technical file before asking for a review.

Let the actual site shape the removal plan

For equipment in Corpus Christi, the relevant details are the conditions at its particular location, not assumptions based on the city. Tell us whether the chiller is indoors or outdoors, at grade or elevated, and whether it remains connected to building systems. Photos of the installation and the route toward a loading area can reveal questions to resolve before scheduling. If access is restricted, explain who can authorize entry and what approvals are required.

Outdoor exposure, corrosion, tight clearances, overhead obstructions, occupied areas, and shared service routes may affect the work when present. The authorized site contact should identify property rules, operating constraints, isolation boundaries, and any areas that must stay clear. We coordinate the equipment work with that contact and arrange appropriate refrigerant recovery with qualified personnel, disconnects, rigging, crane work when needed, loading, freight, and hauling.

Removal responsibilities, clearly divided

If a purchase is agreed, the buyer handles the equipment work and coordinates the agreed pickup scope. The seller or site supplies accurate information, authorized access, applicable site rules, and necessary approvals. No seller-run test, repair, refrigerant recovery, crane booking, or hauling arrangement is required. The work sequence and timing are agreed with the authorized contact so the crew can respect services and equipment that are not being removed.

Do not assume a crane is necessary—or that it can reach the machine—before the site is reviewed. Indoor access, roof openings, rigging points, loading space, and the path out may all influence handling. Share known restrictions early and identify any conditions that could affect access. The appropriate method is determined for the actual equipment and site, rather than from a generic removal plan.

Offer terms and payment

A cash offer is based on the asset and project information reviewed; it is not automatic or guaranteed. If a purchase is agreed, payment is made upfront before pickup, on terms agreed with the seller. Confirm the equipment scope, access arrangements, and payment terms before work is scheduled. Avoid treating a preliminary discussion as a final offer until the asset and removal details have been reviewed.

A practical next step

To begin, gather the identification plate if available, a few clear photos, the unit’s known operating status, and a concise description of what is included. Add the equipment’s location within the property, any known access limits, and the name or role of the person authorized to coordinate a review. If details are unknown, say so. That gives us a grounded starting point without asking you to restart the chiller or make claims you cannot verify.

Owner-supplied photo of an industrial air-cooled chiller
Equipment we buy

IF IT’S A CHILLER,
LET’S TALK.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.

  • 20 to 2,000+ tons and all refrigerants
  • Data centers, power plants, hospitals and campuses
  • Plant closures, replacements and decommissioning
  • All rigging and freight handled by us
TELL US WHAT YOU HAVE ↗
Ready when you are

LET’S MAKE A
DEAL.

Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.

Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗

Prefer email?

saleselectricalbuyers@gmail.com

JPG or PNG. Combined photos up to 10 MB. Don’t know every detail? Send what you have. Your information is sent to our email through FormSubmit.

REQUEST A QUOTE ↗
CALL (614) 715-3047TEXT PHOTOS ↗