TEXAS INDUSTRIAL CHILLER BUYERS • WE BUY, NEVER SELLHAVE A CHILLER TO SELL? CALL (614) 715-3047
Owner-supplied photograph of industrial chiller equipment
Chiller buyer serving Corpus Christi

Sell a Smardt Chiller in Corpus Christi, Texas

We buy Smardt chillers in Corpus Christi, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.

Texas-wide service   /   20 to 2,000+ tons
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
A simpler exit for surplus equipment

WE BUY THE CHILLER.
WE HANDLE THE HEAVY LIFTING.

From first photo to final haul, we take care of the details so you can move forward.

01 / SHOW US

SEND THE DETAILS

Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.

02 / GET PAID

RECEIVE A CASH OFFER

We review the chiller and your site information, then make an offer. Payment is upfront.

03 / WE MOVE IT

LEAVE THE LOGISTICS TO US

We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.

Start with the machine and the handoff

When a Smardt chiller is being replaced, taken out of service, or left over after a facility change, the first question is often not whether it can start. We buy used industrial and commercial chillers, including Smardt units, and consider idle and non-running equipment. You do not need to run, test, repair, or restart the chiller for us to review it.

For an initial assessment, share what you know: the model or nameplate details, approximate cooling capacity, refrigerant if identified, current condition, and whether the machine is connected or stored. Photos of the complete unit, controls, and any visible damage help clarify what is being offered. Service records are useful when available, but missing paperwork need not prevent an initial discussion.

Agree on authority before setting a pickup

A sale and a site visit can involve different decision-makers. The equipment owner or an authorized representative must be able to approve the sale; a facilities contact may separately control access, work windows, and site requirements. Identify both roles early, especially if the seller is a contractor, property manager, or project representative rather than the owner.

Before scheduling removal, confirm who can approve the transaction, who can admit the removal crew, and whether another party must approve work or equipment movement. Tell us about sign-in procedures, escorts, operating hours, permits, or other access rules that apply. The authorized site contact supplies accurate information, access, site rules, and necessary approvals. We coordinate the equipment work covered by the agreed scope.

Describe the route, not just the chiller

Pickup planning depends on how the unit can be reached and moved. Note whether it sits in a plant room, outdoors, on a roof, or in storage; whether it remains connected; and the route from its position to a loading area. Photos showing doors, corridors, stairs, overhead obstructions, and truck access can reveal questions that a nameplate cannot answer.

Also mention known limits on floor or ground support, clearances, lifting points, nearby operating equipment, and areas that must remain open. These details do not establish a removal method on their own. The handling plan—including whether a crane or specialized rigging is needed—depends on the actual machine and site conditions. A cooling ton measures capacity; it does not tell us the chiller’s weight.

Condition can be reported without a startup

Be direct about what works, what is uncertain, and what is missing. A unit may be idle, decommissioned, incomplete, or non-running; we consider such equipment, subject to review. If you know of corrosion, prior repairs, damaged panels, removed components, or long-term outdoor storage, include that information and photographs where practical. Do not restart the machine simply to improve the description.

We consider water-cooled and air-cooled equipment, including centrifugal, screw, and scroll chillers, generally from 20 to 2,000-plus cooling tons, and consider all refrigerants. That range describes equipment we review, not a promise to purchase every unit. The asset, available information, removal needs, and project circumstances determine whether an offer is appropriate.

Recovery and removal are part of the agreed scope

Do not vent refrigerant or open the chiller’s refrigerant circuit. If the refrigerant type, charge, or system history is unknown, say so; equipment configuration and charge are confirmed as the actual scope is reviewed. When a purchase is agreed, we arrange and handle appropriate refrigerant recovery with qualified personnel, along with necessary disconnects, rigging, crane work when needed, loading, freight, and hauling.

The seller is not expected to hire a recovery contractor, crane, or hauler, or to perform the equipment work. Removal still has to fit the site’s authorized access and rules. Coordinate any required approvals with the responsible facility contact, and identify adjacent equipment or restricted areas that could affect the work sequence.

Offer, payment, and pickup timing

A cash offer depends on the chiller and the actual project review; it is not guaranteed. The review may account for identification, condition, what is included, and the practical removal and transport scope. Clarify which components or accessories are part of the proposed sale so both sides understand what will be collected.

If we agree to purchase the equipment, payment is made upfront before pickup, on the terms agreed for the transaction. Confirm the sale authority and access arrangements before settling a pickup window. Scheduling can then account for the site contact’s availability, any work restrictions, and the removal plan.

A useful first submission

Gather the information already at hand: nameplate or model details, capacity if known, refrigerant markings, current condition, photographs, location within the site, and a brief description of the removal route. Include the name or role of the person authorized to approve the sale and the contact responsible for access. If a detail is unknown, label it as unknown rather than guessing.

With those basics, we can review the Smardt chiller and discuss whether a purchase and coordinated pickup make sense. There is no need to clean, test, repair, disconnect, or prepare the unit before requesting consideration.

Owner-supplied photo of an industrial air-cooled chiller
Equipment we buy

IF IT’S A CHILLER,
LET’S TALK.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.

  • 20 to 2,000+ tons and all refrigerants
  • Data centers, power plants, hospitals and campuses
  • Plant closures, replacements and decommissioning
  • All rigging and freight handled by us
TELL US WHAT YOU HAVE ↗
Ready when you are

LET’S MAKE A
DEAL.

Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.

Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗

Prefer email?

saleselectricalbuyers@gmail.com

JPG or PNG. Combined photos up to 10 MB. Don’t know every detail? Send what you have. Your information is sent to our email through FormSubmit.

REQUEST A QUOTE ↗
CALL (614) 715-3047TEXT PHOTOS ↗