SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy 1,000 to 1,999 ton chillers in San Antonio, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
A chiller rated from 1,000 to 1,999 tons is a substantial piece of plant equipment, but capacity alone does not establish its value, weight, condition, or removal requirements. We buy used industrial and commercial water-cooled and air-cooled chillers in this range, including centrifugal, screw, and scroll units. Refrigerant type does not automatically rule out a review, and idle or non-running equipment can be considered.
For an initial assessment, share whatever identification is available: manufacturer and model, serial or nameplate information, stated capacity, and whether the unit is installed, disconnected, or in storage. Photos of the whole assembly and its surroundings can fill gaps in older records. Do not start the machine to gather information. If a label is missing or unreadable, say so and provide the details you do have.
A cooling ton measures cooling capacity; it is not the chiller’s physical weight. A lift plan depends on verified dimensions and weight, how the machine is assembled, and the conditions along its route out of the facility. Large chillers may have components that affect how the load can be handled, but the actual configuration must be established from the offered equipment rather than guessed from its rating.
Photograph the unit from safe, accessible viewpoints, including visible sections of the nameplate, connected piping, nearby obstructions, and the apparent exit route. Note known modifications, missing components, damage, or loose parts that would be included. Avoid opening panels or entering restricted areas to get a better image; an authorized site contact can advise what access is allowed.
At a connected chiller, it matters which equipment and services are included and which must remain in place. Nearby pumps, piping, electrical gear, controls, or other chillers are not presumed to be part of a purchase. Identify the boundary as clearly as you can, and mention utilities or adjacent systems that the facility needs to preserve.
We coordinate appropriate refrigerant recovery with qualified personnel and handle the chiller disconnects as part of the agreed removal scope. The seller does not need to test, run, repair, restart, or open the refrigerant circuit. Do not vent refrigerant. If the charge or refrigerant identity is unknown, report that uncertainty rather than trying to confirm it yourself.
For a San Antonio facility, the practical removal plan depends on the actual site. A chiller could be in a plant room, on a roof, beside an outdoor service area, or elsewhere; no single access assumption fits every property. Doors, overhead clearance, floor capacity, turns, temporary obstacles, and the distance to a loading position may all affect the method. Crane work may be appropriate in some layouts, while another route may call for different rigging arrangements.
Tell us about access restrictions, operating hours, occupied areas, and any known work windows. The authorized site contact supplies accurate site information, explains applicable rules, secures necessary approvals, and arranges authorized access. We coordinate the equipment work, rigging, crane work when needed, loading, freight, and hauling against the conditions reviewed and agreed with that contact.
A cash offer depends on the particular chiller, its condition and included components, the available information, and the removal work required. We review the asset and project details before making an offer; purchasing is not assured. If both sides agree to proceed, payment is made upfront before pickup under the agreed terms. Confirm who is authorized to sell the equipment and precisely what is transferring before scheduling removal.
When a unit has been idle, stored, partly dismantled, or left with incomplete records, describe that history as accurately as possible. The machine does not have to be operating for consideration, and incomplete information can still support an initial review. Any remaining uncertainty can be discussed before the scope and terms are finalized.
To begin, gather the best available identification, a few safe photographs, the chiller’s location on the property, and a short note about condition, access, and what is included. If you know the refrigerant, shutdown status, or approximate removal window, include it; if not, mark it unknown. This gives us a practical basis to review the equipment and determine what additional site information is needed, without asking you to prepare or operate the chiller first.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com