SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy chillers marked R-12 in Beaumont, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
If you have a chiller marked R-12 in Beaumont, begin with what you can safely observe: the equipment nameplate, refrigerant marking, and where the unit is located. A clear photo of each label can make an initial review more useful. If the marking is faded, altered, or inconsistent with records, say so; do not guess at the refrigerant or open the circuit to check.
We buy used industrial and commercial chillers, including units marked R-12, and consider idle or non-running equipment. You do not need to test, restart, repair, or clean the machine for us. A cooling-ton rating describes capacity, not the chiller’s weight, so it does not by itself tell us what removal will involve.
Along with the plate and refrigerant label, share the manufacturer, model, stated capacity, and any known history. Note whether the chiller is installed, disconnected, or in storage, and mention missing components or visible damage you already know about. Existing service records, conversion paperwork, or equipment photos can help, but you do not need to assemble a complete file before starting a conversation.
Beaumont identifies the equipment’s location for review; the actual site conditions still need to be described. Tell us whether the unit is indoors or outdoors, on a roof or at grade, and whether it is accessible from a loading area. If you are unsure about a detail, mark it as unknown rather than estimating. The offer depends on review of the actual asset and project, not the refrigerant label alone.
Before pickup planning, identify the owner or representative authorized to sell the chiller and the site contact who can approve access and coordinate work. Those roles may belong to different people. Clarify what is included in the sale: for example, whether related equipment or loose components are part of the agreed scope, and what must remain in place.
If the chiller is near operating equipment, describe the boundary of the asset and any utilities or services that must remain undisturbed. The authorized facility contact can explain isolation procedures, required approvals, escort rules, and permitted work windows. Removal should be coordinated around the site’s actual operating limits rather than assuming nearby systems can be shut down.
Pickup planning depends on how the unit can reach a truck. Share known door or hatch dimensions, stairs, overhead obstructions, turning space, floor or roof access limits, and the distance to a suitable loading point. Mention any constraints on crane positioning, truck access, ground support, or staging when known. These details help identify questions for the site review; they do not require you to select rigging or transport equipment.
The route may be straightforward, or it may require a coordinated lift or other handling plan. The actual configuration, weight, condition, surroundings, and available clearances are not known until reviewed. A chiller’s cooling capacity should not be used as a substitute for equipment dimensions or lift information.
A refrigerant marking is useful information, but it does not confirm the system’s current charge or full service history. Do not vent refrigerant or open the circuit. If a purchase is agreed, we arrange appropriate refrigerant recovery with qualified personnel, along with necessary disconnects, rigging, crane work when needed, loading, freight, and hauling. The seller is not required to hire a recovery contractor, crane, or hauler for us.
The site supplies accurate information, authorized access, applicable site rules, and necessary approvals. Its representative can identify where work may take place and what nearby systems need protection. Our team coordinates the equipment work with that contact, based on the agreed scope and conditions found at the facility.
After reviewing the chiller and removal scope, we may discuss a cash offer. An offer is subject to the asset and project review and is not guaranteed. If we agree to purchase, payment is made upfront before pickup on the terms agreed by both sides. Confirm the amount, payment arrangement, included equipment, and authorized seller before scheduling removal.
To begin, gather the best available nameplate and refrigerant-label photos, a few views of the unit and its route out, and notes on known condition and site access. Send the information through the available inquiry process, flag uncertainties plainly, and identify who can authorize the sale. That gives the review a practical starting point without asking you to run or dismantle the chiller.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com