TEXAS INDUSTRIAL CHILLER BUYERS • WE BUY, NEVER SELLHAVE A CHILLER TO SELL? CALL (614) 715-3047
Owner-supplied photograph of industrial chiller equipment
Chiller buyer serving El Paso

Sell a McQuay Chiller in El Paso, Texas

We buy McQuay chillers in El Paso, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.

Texas-wide service   /   20 to 2,000+ tons
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
A simpler exit for surplus equipment

WE BUY THE CHILLER.
WE HANDLE THE HEAVY LIFTING.

From first photo to final haul, we take care of the details so you can move forward.

01 / SHOW US

SEND THE DETAILS

Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.

02 / GET PAID

RECEIVE A CASH OFFER

We review the chiller and your site information, then make an offer. Payment is upfront.

03 / WE MOVE IT

LEAVE THE LOGISTICS TO US

We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.

Start with the machine, not its condition

A McQuay nameplate can help identify a chiller, but it does not establish its capacity, configuration, refrigerant, or present condition. We buy used McQuay water-cooled and air-cooled chillers, including centrifugal, screw, and scroll units. Equipment may be idle or non-running; you do not need to start it or arrange a test to have it reviewed.

For an initial review, gather what is already available: a clear photo of the identification plate, overall views of the machine, and any records that describe its history or modifications. Note whether the chiller is installed, stored, or partly dismantled, and what components you intend to include. If a label is unreadable or records are missing, say so rather than guessing.

Capacity is not removal weight

Cooling capacity is commonly stated in tons, but a cooling ton measures refrigeration capacity; it is not the machine’s weight. For removal planning, the actual equipment dimensions, construction, configuration, and verified weight matter. Do not estimate lifting needs from the capacity rating alone. We generally consider chillers from 20 to 2,000-plus cooling tons, with the specific asset and project subject to review.

Identify the complete assembly as accurately as you can. If pumps, a starter, controls, or other equipment might be part of the sale, list those separately and provide photographs where possible. Do not assume that connected plant components are included simply because they sit beside the chiller.

Draw the connection boundary

Before a handoff is scoped, the parties need to distinguish the chiller from piping, wiring, controls, and equipment that will remain in service. If the unit shares connections with another machine or a live system, point those out and identify who at the facility can confirm the boundary. A replacement project may have contractors working nearby; their schedule and work limits can affect access and sequencing.

You do not need to disconnect the chiller, open a refrigerant circuit, or have it repaired or restarted for an offer review. Do not vent refrigerant. We arrange and handle appropriate refrigerant recovery with qualified personnel, and coordinate necessary disconnects as part of the agreed equipment work. The actual system and site procedures determine the practical sequence.

Make the route understandable

Photographs of the route can be as useful as photographs of the chiller. Show the nearest practical exit, doors or openings, turns, overhead obstructions, stairs or ramps, and the route from the equipment area to a loading point. If the machine is on a roof, below grade, or behind restricted areas, describe that plainly. These details help determine what must be verified before rigging is arranged.

For a pickup in El Paso, give the authorized site contact’s guidance on entrance procedures, escorts, work hours, permits, and areas that must remain clear. Tell us if the loading approach depends on a particular gate, delivery window, or shared service corridor. We coordinate rigging, crane work when needed, loading, freight, and hauling; the appropriate plan depends on the actual equipment and property.

Keep site responsibilities clear

The buyer handles the agreed equipment work and arranges the removal resources. The seller or property representative supplies accurate information, authorized access, site rules, and approvals needed for that work. If isolation, security, or contractor coordination must be handled through a specific facility representative, identify that person early so the handoff can be planned with the people who control the site.

Do not move the chiller or prepare a lift based on an unverified assumption about its weight or the building route. If floor limits, clearance restrictions, or lifting points are documented, share those records. If a detail is unknown, label it unknown; the removal approach can be developed around information confirmed for the project.

Review, offer, and transfer

We consider McQuay chillers across refrigerants and operating conditions, including units that do not run. That does not mean every machine or project will be purchased. A cash offer depends on the asset information and review of the actual project, including what is included and the practical removal scope. An offer is not guaranteed before that review.

If a purchase is agreed, payment is made upfront before pickup on the terms agreed with the authorized seller. Confirm in advance which equipment transfers, the payment terms, access arrangements, and the pickup scope. This gives the facility and removal team a shared understanding of what is being sold and what must remain in place.

A useful first submission

To begin, provide the chiller’s nameplate information if available, photographs, known operating status, and a short description of its connections and route out. Include the El Paso site’s access requirements and the name or role of the person authorized to coordinate the property side. There is no need to test, clean, repair, restart, or disconnect the machine first. With that information, the asset and removal scope can be reviewed before any pickup is scheduled.

Owner-supplied photo of an industrial air-cooled chiller
Equipment we buy

IF IT’S A CHILLER,
LET’S TALK.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.

  • 20 to 2,000+ tons and all refrigerants
  • Data centers, power plants, hospitals and campuses
  • Plant closures, replacements and decommissioning
  • All rigging and freight handled by us
TELL US WHAT YOU HAVE ↗
Ready when you are

LET’S MAKE A
DEAL.

Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.

Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗

Prefer email?

saleselectricalbuyers@gmail.com

JPG or PNG. Combined photos up to 10 MB. Don’t know every detail? Send what you have. Your information is sent to our email through FormSubmit.

REQUEST A QUOTE ↗
CALL (614) 715-3047TEXT PHOTOS ↗