SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy hotel chillers in Austin, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
A hotel chiller can be offered for review even when its operating history is incomplete. Records may be spread across facilities files, contractors, and past renovations; a unit may also have been shut down before the current staff took over. Missing service reports or an unknown last run do not by themselves prevent an initial review. Be clear about what you know, what you have been told, and what remains uncertain.
We buy used hotel chillers in Austin, including water-cooled and air-cooled equipment and centrifugal, screw, and scroll units. We consider a broad range of capacities, generally from 20 to more than 2,000 cooling tons, and consider all refrigerants. Idle or non-running equipment can be reviewed too. A cooling ton measures capacity, not the machine’s weight, so the tonnage alone does not tell us what removal will involve.
Begin with the nameplate information if it is safely accessible: manufacturer, model, serial number, stated capacity, and refrigerant type. Add the approximate age, known faults, shutdown date if known, and whether the chiller is still connected. Photographs of the nameplate and the overall machine are helpful, but do not enter a restricted area or remove guards to get them. You do not need to test, run, repair, or restart the equipment for us.
If the records do not agree with the nameplate, share both rather than guessing which is right. Note whether controls, pumps, starters, or other items are included in the proposed sale. The offer depends on review of the actual asset and collection project; it is not guaranteed. Condition matters, but so can configuration, access, included components, and the work needed to remove the unit.
A hotel may need to keep guest areas, service corridors, deliveries, and building operations moving while equipment is removed. The actual route could pass through a plant room, service area, roof, loading zone, or another constrained space. Tell us where the chiller sits and what must remain accessible during the work. A photo or simple marked-up plan of the route can reveal questions that a close-up of the machine cannot.
Removal planning depends on the particular property. Door and ceiling clearances, floor conditions, staging space, loading access, work hours, escorts, permits, and noise restrictions may matter if they apply. If a crane or rigging is needed, the available setup area and approved lifting route require review. We coordinate with the authorized site contact rather than assuming that a public entrance, loading dock, or work window is available.
Do not vent refrigerant or open the chiller’s refrigerant circuit to prepare it for sale. We arrange appropriate refrigerant recovery with qualified personnel as part of an agreed purchase and removal plan. The refrigerant charge and system condition may not be known at the outset, so provide any available information without trying to verify it yourself.
Electrical and piping disconnections also need coordination with the people authorized to work on the hotel’s systems. We handle the equipment-side removal work, arranging the recovery, disconnects, rigging, crane work when needed, loading, freight, and hauling for the agreed scope. The seller or site team should identify site rules, provide accurate information, arrange authorized access, and secure necessary approvals; the seller does not need to hire a recovery contractor, crane, or hauler for us.
After reviewing the chiller and project details, we can discuss whether to make a cash offer and what equipment and removal scope it covers. A purchase is subject to that review, and no offer is guaranteed. If both sides agree to buy, payment is made upfront before pickup under the agreed terms. The pickup date and site arrangements are coordinated with the authorized contact before work begins.
To start, share the identification details you have, a few safe photographs, the chiller’s location within the property, its known condition, and any information about access or timing. Flag uncertainties rather than filling gaps with estimates. If the unit is part of a replacement project, note the planned handoff date and which facility or project representative can confirm the equipment boundary.
We can review available information without requiring a restart or a complete maintenance file. Once the asset and site scope are clearer, we can discuss the proposed purchase and the steps needed for coordinated removal in Austin. No hotel staff member needs to open the refrigerant circuit or prepare the chiller for testing before that conversation.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com