SEND THE DETAILS
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We buy Carrier chillers in Fort Worth, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.
From first photo to final haul, we take care of the details so you can move forward.
Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.
We review the chiller and your site information, then make an offer. Payment is upfront.
We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.
If you are considering selling a Carrier chiller in Fort Worth, begin with the identification plate—not a startup, inspection, or attempt to estimate its value. A clear photo of the main nameplate can help establish the model, serial number, capacity, and electrical details. If the plate is hard to reach, share what you can see safely; do not climb over equipment or remove covers to get a picture.
Carrier is the name on the machine, but the specific configuration matters. If you know whether it is water-cooled or air-cooled, or whether it uses a centrifugal, screw, or scroll compressor, include that information. Don’t worry if you are unsure. Photos of the overall unit, control panel, and accessible labels can help fill gaps.
Tell us whether the chiller is operating, idle, disconnected, in storage, or known not to run. We consider non-running equipment and do not require you to test, repair, restart, or prove the unit works. If you know about missing components, prior repairs, a changed compressor, or an incomplete service history, say so plainly. Unknowns are useful to flag rather than guess at.
Capacity is worth noting when available, but cooling tons measure output—not the chiller’s weight. A unit’s shipping weight and lifting points must be established from reliable equipment information and the actual configuration before removal planning. Don’t infer weight from tonnage.
Along with the nameplate details, explain what is included in the proposed sale: the chiller, controls, pumps, or other associated items, if applicable. Identify anything that will remain at the facility or is excluded. A few current photos can show how the equipment is installed and what is around it; they need not substitute for a formal survey.
Share the known refrigerant type or charge information if it is already documented. If it is not, say that it is unknown. Do not vent refrigerant, open the circuit, or run the machine to find out. We consider all refrigerants and arrange appropriate recovery with qualified personnel as part of an agreed removal scope.
For equipment in Fort Worth, the useful question is not simply whether a truck can reach the property, but how the chiller can be moved from its present position to a loading point. Describe the route as you understand it: indoor or outdoor placement, doors or gates, overhead clearance, stairs or level changes, and space for staging. Mention restricted entry, escort procedures, work-hour limits, or approval steps if they apply.
Conditions vary from one site to another. A chiller may sit in a mechanical room, on a roof, in an operating plant, or in a storage area; none of those arrangements should be presumed. Photos of the access route and loading area can help identify questions for the site review. Point out nearby equipment, occupied areas, utilities, or services that must stay in operation where relevant.
Identify who owns the chiller or has authority to approve its sale, and who can authorize access and coordinate work at the property. Those roles may belong to different people. The site contact can explain local safety rules, required approvals, isolation procedures, and any limits on equipment or vehicles entering the work area.
You do not need to arrange a separate crane, rigging crew, refrigerant recovery provider, or hauler before asking about a sale. If a purchase is agreed, we coordinate and handle the appropriate recovery, disconnects, rigging, crane work when needed, loading, freight, and hauling. The removal plan is based on the actual machine and site, and proceeds with the authorized contact’s access, rules, and necessary approvals in place.
A cash offer depends on the asset information and review of the actual project, including what is included and the work required to collect it. An offer is not guaranteed, and a brand, capacity, or visible condition alone does not establish a purchase amount. Before pickup, confirm the equipment and included items, agreed terms, access plan, and timing with the authorized seller.
If we agree to buy the chiller, payment is made upfront before pickup under the agreed terms. You are not expected to restart or prepare the unit for a demonstration. The buyer’s team handles the equipment work; the seller and site provide accurate information, authorized access, and the approvals needed for the agreed scope.
Gather a nameplate photo, a few views of the machine, its known operating status, and a short description of where it sits and how access works. Add any available service or refrigerant records, but don’t delay if those documents are unavailable. Share what is known, label what is uncertain, and identify the person who can discuss both the sale and site access. That gives us a practical starting point to review the Carrier chiller and determine whether an offer and pickup plan can be agreed.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.
Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.
Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗Prefer email?
saleselectricalbuyers@gmail.com