TEXAS INDUSTRIAL CHILLER BUYERS • WE BUY, NEVER SELLHAVE A CHILLER TO SELL? CALL (614) 715-3047
Owner-supplied photograph of industrial chiller equipment
Chiller buyer serving Austin

Basement Removal for Chillers in Austin, Texas

We buy chillers in basement plants in Austin, Texas, with cash offers and upfront payment when a purchase is agreed. We handle removal, and the seller does not need to test the equipment.

Texas-wide service   /   20 to 2,000+ tons
Payments Upfront
No Testing
We Cover All Freight
All Tonnages Bought
A simpler exit for surplus equipment

WE BUY THE CHILLER.
WE HANDLE THE HEAVY LIFTING.

From first photo to final haul, we take care of the details so you can move forward.

01 / SHOW US

SEND THE DETAILS

Share a nameplate photo, the location, and whatever you know about your equipment. No testing is required from you.

02 / GET PAID

RECEIVE A CASH OFFER

We review the chiller and your site information, then make an offer. Payment is upfront.

03 / WE MOVE IT

LEAVE THE LOGISTICS TO US

We handle disconnects, refrigerant recovery, crane and rigging, loading, freight and hauling.

Start with what is known—and label the gaps

A chiller in a basement plant can be reviewed for purchase without first proving that it runs. The starting point is a clear account of what is installed, what is known about its condition, and how the equipment might leave the building. Unknowns are useful to identify honestly: a missing nameplate, uncertain refrigerant charge, or an access route nobody has measured is better reported as unknown than guessed.

We buy used water-cooled and air-cooled industrial and commercial chillers, including centrifugal, screw, and scroll units. We consider equipment generally from 20 to more than 2,000 cooling tons, all refrigerants, and idle or non-running machines. This range does not promise that a particular unit will be purchased; any offer depends on reviewing the actual asset and project.

Make the first review easier with photos

Good photographs can answer practical questions before anyone visits. If available, send readable nameplate images, full views of the chiller, and close-ups of visible connections, controls, and included components. For a basement installation, show the equipment room and the route toward the building exit, including doors, turns, stairs, ramps, overhead obstructions, and any freight elevator proposed for use.

Include measurements only when they are known. Note whether an opening or passage has a confirmed clearance, rather than estimating from a photo. A cooling-ton rating describes capacity, not the machine’s shipping weight. Weight, dimensions, lifting points, and the route need to be established for the actual equipment and removal plan.

What matters beyond the machine

Along with pictures, describe the chiller’s make and model if legible, configuration, approximate age if known, operating history, and present status. Say whether it is running, idle, incomplete, or known to have a fault. Mention parts that are included or excluded, such as pumps, starters, or controls, only if they are part of the proposed sale. Do not fill gaps with assumptions about performance or condition.

The building can shape the work just as much as the unit. An authorized site contact can identify access hours, security steps, floor or structural restrictions, occupied areas, utility isolation procedures, and approvals needed before work starts. If a basement corridor is shared, the exit is narrow, or staging space is limited, describe what is actually known. The removal plan can then be reviewed against those conditions instead of an imagined standard layout.

No test run or repair is needed to ask

You do not need to restart, clean, repair, or test the chiller before requesting a review. Do not vent refrigerant or open the refrigerant circuit. If the system’s charge or refrigerant type is uncertain, say so; the equipment can still be considered, and recovery is coordinated as part of the agreed work by qualified personnel.

A non-running unit may still warrant consideration, but its condition, completeness, access, and handling requirements affect the review. Share existing service notes or fault information if readily available; commissioning it or arranging a new inspection is not a prerequisite just to begin. The aim is to assess the equipment and removal scope from credible information, not to ask the seller to make an unknown machine appear operational.

How an offer and basement pickup are evaluated

A cash offer is based on the asset and the actual project review—not tonnage alone. Equipment type, refrigerant, condition, included components, and the work needed to remove it may all matter. In a basement, the route, verified dimensions and weight, clearances, suitable lifting points, and whether rigging or a crane is appropriate can also affect feasibility. An offer is not guaranteed until the equipment and project have been reviewed and terms agreed.

If a purchase is agreed, payment is made upfront before pickup on the agreed terms. We arrange and handle appropriate refrigerant recovery, disconnects, rigging, crane work when needed, loading, freight, and hauling within the agreed scope. The authorized site representative supplies accurate information, access, site rules, and necessary approvals. Work timing and the handling method are coordinated with that representative for the actual property.

A useful next step

Gather the clearest identification and route photos you already have, then make a short inventory of what is known and what remains uncertain. Include the chiller’s current status, any available dimensions or weight, the proposed equipment included in the sale, and the name or role of the person authorized to coordinate access. You can submit that information for review without arranging a test, hiring a recovery contractor, or booking a crane yourself.

Before any pickup is scheduled, confirm which equipment is included, the agreed purchase and payment terms, the site contact, and any access or approval requirements still to be satisfied. That conversation helps establish whether the basement route and removal work can be handled as planned, while keeping responsibility for site access distinct from the equipment work arranged by the buyer.

Owner-supplied photo of an industrial air-cooled chiller
Equipment we buy

IF IT’S A CHILLER,
LET’S TALK.

Air-cooled or water-cooled. Centrifugal, screw or scroll. From single units to large shutdown projects, we buy industrial chillers across Texas.

  • 20 to 2,000+ tons and all refrigerants
  • Data centers, power plants, hospitals and campuses
  • Plant closures, replacements and decommissioning
  • All rigging and freight handled by us
TELL US WHAT YOU HAVE ↗
Ready when you are

LET’S MAKE A
DEAL.

Send us your chiller details and nameplate photos for a cash offer. Don’t worry if you don’t know every specification—we can start with what you have.

Call or text(614) 715-3047TEXT NAMEPLATE PHOTOS ↗

Prefer email?

saleselectricalbuyers@gmail.com

JPG or PNG. Combined photos up to 10 MB. Don’t know every detail? Send what you have. Your information is sent to our email through FormSubmit.

REQUEST A QUOTE ↗
CALL (614) 715-3047TEXT PHOTOS ↗